Nathan54771 Posted October 28, 2014 Author Share Posted October 28, 2014 Yehh it'd be better im sure and I can't be bothered fabricating any and welding/bolting them in place. So probli end up leaving it. Would look good though, seen a black one (Luke's I think) with them and looks stealthy. Quote Link to comment Share on other sites More sharing options...
Chelzi2lv Posted October 30, 2014 Share Posted October 30, 2014 Some good ideas in here, i cant wait to start adding stuff to my ST :) Quote Link to comment Share on other sites More sharing options...
Nathan54771 Posted October 30, 2014 Author Share Posted October 30, 2014 Thanks, bet you can't wait now. What you got planned ? Quote Link to comment Share on other sites More sharing options...
Chelzi2lv Posted October 31, 2014 Share Posted October 31, 2014 Im not too sure just yet tbh, however i know as soon as im inside it, ill know what i want lol 1 Quote Link to comment Share on other sites More sharing options...
Nathan54771 Posted November 8, 2014 Author Share Posted November 8, 2014 So today I ended up going to a Dyno Day in Stockport at Dr !Removed! with a friend and fellow member from here. Very happy with the results and now I can see what gains I get once I get it remapped etc. Here's the graph (very happy with 211.7hp standard form) My car on the dyno My friends car on the dyno (Vito) trim.563A386A-AAE3-445E-A71C-BB35B0987CE0.MOV 1 Quote Link to comment Share on other sites More sharing options...
vito787 Posted November 9, 2014 Share Posted November 9, 2014 Wish mine wasn't miss firing :'( Sent from my iPhone using Ford OC Quote Link to comment Share on other sites More sharing options...
Nathan54771 Posted November 9, 2014 Author Share Posted November 9, 2014 Still think of the positive 137bhp output, hopefully Gary sorts it on Saturday and maybe even updates it to push it too that extra 145bhp Hahaa Quote Link to comment Share on other sites More sharing options...
Philf1 Posted November 9, 2014 Share Posted November 9, 2014 That's pretty good Nathan for standard spec. How much does it cost for the dyno?. Quote Link to comment Share on other sites More sharing options...
Nathan54771 Posted November 9, 2014 Author Share Posted November 9, 2014 I know was quite pleased with the results, now I've got something to compare to once I choose my stage 1 map etc. It cost £35 for a three run dyno and print out at Dr !Removed! in stockport. Was a dyno day though so guessing it was cheaper maybe ? Quote Link to comment Share on other sites More sharing options...
Philf1 Posted November 9, 2014 Share Posted November 9, 2014 Thanks for that. Would be interesting to see a Mountune on their dyno see what that comes out at as they only claim 215 Quote Link to comment Share on other sites More sharing options...
Nathan54771 Posted November 9, 2014 Author Share Posted November 9, 2014 Yeh would be interesting, I'm more than likely going mountune after Christmas so might get it back on once ive done It to compare :) Quote Link to comment Share on other sites More sharing options...
GlynnZS Posted November 9, 2014 Share Posted November 9, 2014 If it's that cheap normally I wouldn't mind taking mine down, see how much difference bluefin makes... not too far from me. Can you spell the [!removed] bit with a space or hyphen in there so we can see what comes after Dr.... Quote Link to comment Share on other sites More sharing options...
Nathan54771 Posted November 10, 2014 Author Share Posted November 10, 2014 Yeh have a look at there facebook page and maybe ask how much it is normally :) Hahaa sorry didn't realise it blocked the word 🙈 it's "J-A-P-S" Quote Link to comment Share on other sites More sharing options...
GlynnZS Posted November 10, 2014 Share Posted November 10, 2014 is the filter anticipating 'eye' after that? let's see... japseye 1 Quote Link to comment Share on other sites More sharing options...
Nathan54771 Posted November 10, 2014 Author Share Posted November 10, 2014 Obviously not Hahaa, just doesn't like the word Ja. Ps 1 Quote Link to comment Share on other sites More sharing options...
GlynnZS Posted November 10, 2014 Share Posted November 10, 2014 What are you planning performance upgrades wise? Any plans to put it on coilovers or lowering springs? Wouldn't mind mine a bit lower but want to hear from someone who has done it first, don't want the ride even harder or handling compromised Quote Link to comment Share on other sites More sharing options...
Phil 87 Posted November 10, 2014 Share Posted November 10, 2014 If that was a bit closer I'd take mine to see if the MP215 is giving me the power it should. I didn't dyno it before the upgrade though. Edit: the max torque is interesting at 248 lb/ft, that's 12 more than Mountune claim for the MP215. Quote Link to comment Share on other sites More sharing options...
Nathan54771 Posted November 10, 2014 Author Share Posted November 10, 2014 Possibly the mountune lowering springs at some point, but not anytime soon as got plenty of stuff I want first :p Hahaa Yeh be interesting to see, it's almost as if mines mountuned already 🙈 wouldnt mind comparing a mountune one before I go spend the ££££ Quote Link to comment Share on other sites More sharing options...
vito787 Posted November 11, 2014 Share Posted November 11, 2014 If it's that cheap normally I wouldn't mind taking mine down, see how much difference bluefin makes... not too far from me. Can you spell the [!removed] bit with a space or hyphen in there so we can see what comes after Dr.... it's normally £45 for 3 runs at Dr j-a-p-s Sent from my iPhone using Ford OC 1 Quote Link to comment Share on other sites More sharing options...
Nathan54771 Posted November 27, 2014 Author Share Posted November 27, 2014 So not really updated this in quite a while now, due to funds being low because it's christmas coming up and other things I needed money for :( so seen as its winter anyway I thought I'd treat the ST after Christmas. But got myself a brodit phone holder seen as I've wanted one for a while.... Happy with the quality and way it fits, pricey but good. Also ran a cable from the usb upto it so I can charge it. Not 100% with the red (might swap to a black cable) and gonna tidy a little bit more, but it will do for now while it's dark until weekend :p Also fitted 6000k xenons a while ago and never posted pictures, so heres a few. Not everyone's liking but I've never had problems with them so stick with them for now.... Also got some cree fog lights to drop in when I get chance aswell Quote Link to comment Share on other sites More sharing options...
Phil 87 Posted November 27, 2014 Share Posted November 27, 2014 Looks good, and those HIDs really show how yellow the standard bulbs are, even the DRLs lol. Quote Link to comment Share on other sites More sharing options...
CookieM Posted November 27, 2014 Share Posted November 27, 2014 Bit the bullet in the end then? :p so glad I bought mine after the long drives to/from work ive had this week. HIDs look good too :) Quote Link to comment Share on other sites More sharing options...
Nathan54771 Posted November 27, 2014 Author Share Posted November 27, 2014 Thanks Phil and I know, not as noticeable with the DRL when in the metal. Need to get the cree's in though 😛 Yehhh ended up ordering one last Friday ollie, was abit put off with the price tag but glad I got one now, they're good quality and fit nice. Yeh can't wait for a nice drive to trial it :p thanks dude Quote Link to comment Share on other sites More sharing options...
Nathan54771 Posted December 26, 2014 Author Share Posted December 26, 2014 Got this for the car yesterday... So thought I'd get it fitted, 2 Quote Link to comment Share on other sites More sharing options...
Martin22 Posted December 28, 2014 Share Posted December 28, 2014 Still needs a clean though ;) Sent from my iPhone using Ford OC Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.