Guest Posted October 26, 2014 Share Posted October 26, 2014 hi guys and gals, I have got one of these falcon 2 window closure interface mods to close windows when I look the car, I have sorted out the wiring from the interface to the car and I know what wires to tap into in the car (between the switch and the motor) the issue is thus, do I have to remove the door car to tap into the this (yellow wire for driver side and the yellow/velvet wire for passenger) or is there other wire with-in the car I can tap into to save removal of the door card. Cheers Quote Link to comment Share on other sites More sharing options...
nazsky786 Posted October 30, 2014 Share Posted October 30, 2014 Best to remove door card. But you should be able to access it from behind the kick panel. But there are loads of wires there so keep it easy. Quote Link to comment Share on other sites More sharing options...
Guest Posted October 30, 2014 Share Posted October 30, 2014 Cheers, ive sorted it now took the driver side panel off for the yellow wire and found the yellow/violet wire in the floor near drivers seat. Done a little testing with a multi meter and soldered into wirring and used heat shrink on all cables. Will have to do a write up thanks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Ford UK Shop
Sponsored Ad
Name: eBay
Ford Model: FordUK Shop
Ford Year: 2024
Latest Deals
Ford UK Shop for genuine Ford parts & accessoriesDisclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.