casey Posted October 26, 2014 Share Posted October 26, 2014 i have an odb11 reader anyone know of any free softwear for my 2005 fusion 1.4 petrol thanks Quote Link to comment Share on other sites More sharing options...
antman99 Posted October 26, 2014 Share Posted October 26, 2014 Try forscan. Quote Link to comment Share on other sites More sharing options...
casey Posted October 26, 2014 Author Share Posted October 26, 2014 tried doesnt seem to work ,might be a bad copy anywhere i can d/load another cheer s Quote Link to comment Share on other sites More sharing options...
antman99 Posted October 27, 2014 Share Posted October 27, 2014 http://forscan.org/download.html Quote Link to comment Share on other sites More sharing options...
jeebowhite Posted November 25, 2014 Share Posted November 25, 2014 FORSCAN is the best but you need a modified ELM cable to get the best from it. Quote Link to comment Share on other sites More sharing options...
sajumwk Posted December 5, 2014 Share Posted December 5, 2014 hi,i have ford fusion 1.4 2005 model car.. my car has the problem with the throttle body...so the garage man recommended me to replace it... if i buy a used one or new one,do i need to reprogrammed it with my car???many thanks 11 11 Quote Link to comment Share on other sites More sharing options...
jeebowhite Posted December 5, 2014 Share Posted December 5, 2014 Throttle body should be a straight swap if that is the issue Quote Link to comment Share on other sites More sharing options...
sajumwk Posted December 5, 2014 Share Posted December 5, 2014 Hi,thanks for your replay...if I buy a used one(I mean,from the same model) after I fix it, do I need to reprogram it on my car...one of my college says that,still I may need to reprogram it to make suitable with my car... Quote Link to comment Share on other sites More sharing options...
jeebowhite Posted December 5, 2014 Share Posted December 5, 2014 I don't believe so, especially if the parts numbers are the same, it's only if the parts are completely different. Quote Link to comment Share on other sites More sharing options...
sajumwk Posted December 22, 2014 Share Posted December 22, 2014 hi,sorry for the late reply... I used a diagnostic program myself with forscan and found a fault code... I couldn't clearly understand the error details...it was..===PCM DTC P2119-E0===Code: P2119 - Electronic throttle position controller - throttle flap malfunction.Status: - DTC Present at Time of Request- Malfunction Indicator Lamp is On for this DTCModule: Powertrain Control ModuleDiagnostic Trouble Code detailsElectronic throttle position controller - throttle flap malfunction.Refer to TSB number 76/2003Throttle plate has not moved to the requested position in the required time.Remove the duct and check for an obstruction at the throttle plate.Check the throttle plate for evidence of mechanical damage.Faulty ETB motor voltageCheck the ETB connector for damage.Faulty ETB===END PCM DTC P2119-E0======OBDII DTC None===Successfull DTC reading, no error codes foundModule: On Board Diagnostic II===END OBDII DTC None======IC DTC None===Successfull DTC reading, no error codes foundModule: Instrument Cluster===END IC DTC None======RCM DTC None===Successfull DTC reading, no error codes foundModule: Restraint Control Module===END RCM DTC None======GEM DTC None===Successfull DTC reading, no error codes foundModule: Generic Electronic Module===END GEM DTC None======ABS DTC B1318===Code: B1318 - battery voltage LowModule: Anti-Lock Brake / Traction Control ModuleDiagnostic Trouble Code detailsbattery Voltage LowThis DTC may be caused by :Check fuses.Power supply to fuseDischarged or faulty battery.Check the condition of the battery.Check the battery charging system.Check the connector for damage or contamination.Check the connectors and wiring harness for damage or contamination.Check the wiring and the appropriate fuse.High resistance in wiringAdditional InformationThe ABS lamp should be illuminated.The ESP lamp should be illuminated.There will be an ESP malfunction warning displayed on the driver information text panel.===END ABS DTC B1318===so does the error details mean,do i need to replace the throttle body or....???? Quote Link to comment Share on other sites More sharing options...
RB2004 Posted December 22, 2014 Share Posted December 22, 2014 Elm-FFN Sent from my iPhone using Ford OC Quote Link to comment Share on other sites More sharing options...
jeebowhite Posted December 22, 2014 Share Posted December 22, 2014 Probably means you need to clean it and the connectors rather than replace straight up. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Ford UK Shop
Sponsored Ad
Name: eBay
Ford Model: FordUK Shop
Ford Year: 2024
Latest Deals
Ford UK Shop for genuine Ford parts & accessoriesDisclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.