antman99 Posted November 16, 2014 Share Posted November 16, 2014 Hi All, Wondered if anyone had come across this before, My EATC on auto mode does not set the fan to any speed regardless of the temperature, sometimes the Hi and Lo will cause it to go to max but not always. There was a fault code on the system B10EA 0x90EA Positive temperature coefficient heater Not sure if it is connected but it was doing it once or twice before but now seems to constantly do it, have forscan and could not see a huge amount on it that looks wrong but I am no expert. Has anyone else heard of this issue and if so any suggestions on what is wrong, Thanks Quote Link to comment Share on other sites More sharing options...
eyemdee Posted November 16, 2014 Share Posted November 16, 2014 AFAIK the fan only operates to assist the Climate Control get to the set temperature. If the car is red hot and temp set to LO or the car is freezing and temp set to HI then the fan would usually cut in on max speed. If there is little difference between the actual and set temperatures then the fan would not be required and may not cut in at all. Quote Link to comment Share on other sites More sharing options...
antman99 Posted November 16, 2014 Author Share Posted November 16, 2014 Hi, Yeh this is what it used to do but recently the fan seems to be never on more than the lowest (no lines are displayed on the small LCD for climate control). Quote Link to comment Share on other sites More sharing options...
KenP Posted November 16, 2014 Share Posted November 16, 2014 Auto never shows any lines on the LCD. Quote Link to comment Share on other sites More sharing options...
antman99 Posted November 17, 2014 Author Share Posted November 17, 2014 I did suspect that but like I say the fan never seems to output any more than the lowest level even if the temp is say 12 and I set it to 25, the consequence for example is the car steams up, it never used to be a problem only recently. Quote Link to comment Share on other sites More sharing options...
M6 44t car park attendant Posted December 24, 2018 Share Posted December 24, 2018 On 11/16/2014 at 7:36 PM, antman99 said: Hi All, Wondered if anyone had come across this before, My EATC on auto mode does not set the fan to any speed regardless of the temperature, sometimes the Hi and Lo will cause it to go to max but not always. There was a fault code on the system B10EA 0x90EA Positive temperature coefficient heater Not sure if it is connected but it was doing it once or twice before but now seems to constantly do it, have forscan and could not see a huge amount on it that looks wrong but I am no expert. Has anyone else heard of this issue and if so any suggestions on what is wrong, Thanks This is a slightly different code but since fixing mine I note that my fan is much more 'incremental' and no longer stays at minimum fan speeds, I hadn't noticed the fan speed to be honest, just saw the PTC fault Read more here Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Ford UK Shop
Sponsored Ad
Name: eBay
Ford Model: FordUK Shop
Ford Year: 2024
Latest Deals
Ford UK Shop for genuine Ford parts & accessoriesDisclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.