Jump to content
Do Not Sell My Personal Information

Restoration And Minor Mods To My 2 Door Mk2 1600 Sport


Pink Panther
 Share

Recommended Posts

Just thought I would post my findings on a 1600 Sport I got.

So I thought to begin with any mk2 would do, then decided I would not be as happy with a 4 door as a 2 door, then decided it would have to be the 1600 Sport, so after much searching worldwide thinking of Importing one, in the course of all this I had completely fried my wifes brain.

I found it purely by chance just at the moment I was giving up on a Sport, and only an 800 mile round trip away, I rang a chap near Edinburgh that had a 2 door and a 4 door on eBay, both were out of my price range as they were mint, but I wanted a project, so he said he had a couple of project cars

So it started with a 2am alarm call from a very ill wife, loaded up 2 children and a wife that had a sickness bug at 2.45am, arrived on the Scottish border at around 9am with a rather bad feeling in my jacksie, oh dear I just developed the bug that my wife was just getting over SERVICES QUICK!

After some much needed relief and another couple of stops finally get to have a look at the cars on offer, arrival around 11am then to be told that one of the cars had gone, but there was another I could look at, the wife was drawn to this barbie pink 2 door, turned out to be a sport, had a look round seems like a good base with no major issues, ended up getting it cheap as he didn't like the colour or some nasty looking body kit that had been put on it.

Next a trip to Glasgow to drop off some wool my wife had sold, debated staying at a hotel, thought it a bad idea with the "Pink Panther" on an unlocked open trailer, last thing I wanted was it nicked the day I bought it, so off home it is then, lots of Coffee and 796 Miles later arrive home at around 12.30 that night just slightly tired but I got a 2 door Sport well worth it,

I will be adding pics as I go along athough I have already stripped the interior before taking any pics, but the rest will have to do

post-59722-0-83623400-1417113244_thumb.j

Link to comment
Share on other sites


you must have a very patient wife a massive journey but well worth it ...maybe the colour is abit too ..for the ladies ..all murrey quote ..:-)

Link to comment
Share on other sites

So I decided to remove the engine and box so I can give them both a thorough going over, also to make it easier to do some minor repairs to the tunnel, I will need a new passenger floor pan, I found I will be renewing the centre exhaust section as some muppet had welded a scaffold pole in lol, will be replacing the steering gators as one of them had been tied up with rope and the other is in pretty bad order, but as a South African import it has solid and reinforced turret tops as on the rs, no other rot any where, I will try and remember to take the camera out next time, much better than the phone

post-59722-0-68577800-1417116081_thumb.j

post-59722-0-49241600-1417116101_thumb.j

post-59722-0-29820300-1417116131_thumb.j

post-59722-0-89713800-1417116158_thumb.j

post-59722-0-18557500-1417116178_thumb.j

post-59722-0-56435900-1417116199_thumb.j

post-59722-0-29008300-1417116234_thumb.j

post-59722-0-36049800-1417116262_thumb.j

Link to comment
Share on other sites

So I have decided to bring the engine and gearbox home, going to give them both a full strip down and rebuild in my cellar over the colder months, if anyone has any experience of 1300 pistons etc.. any advice would be greatly appreciated, also can I just disband the lift pump and blank it off and use just a standard electric pump instead?

Link to comment
Share on other sites

Engine is now completely stripped, awaiting all new gaskets and piston rings, found why it sounded so cammy, the chain tensioner is completely shot, thinking of getting a BCF2K cam, saves time and money on the 234 and the torque is there from 2000rpm instead of 2500rpm, will be polishing all the ports wilh a flap wheel while it is all stripped.

May as well make a start on the gearbox soon while waiting to get everything for the engine, I know the layshaft bearing is fooked, and there was very little oil that came out of it, will get some pics of the engine in pieces if anyone is interested

Link to comment
Share on other sites


  • 1 month later...

I forgot to get pics of what has been done, but there was two shattered piston rings, wrong car, pics of the carb are on another thread that I started to try and find out what it is from, or even the make of it for a start, there was a very poorly made spacer on the inlet manifold, which I will add tomorrow, all the welding is done, seats have arrived, round lights and bowls are here, new carpet and seat runners are on the way, polybushes and all new boots came a few weeks ago, just waiting for a grill to turn up at the right price, found a kinked brake pipe, master cylinder has been rebuilt, not sure what way to go on the speedo, whether to get the white dial stickers or buy a replacement to get it to mph, next job is underseal and go through all the wiring where it has been hacked to pieces, hopefully on the road in around 4 weeks

Link to comment
Share on other sites

  • 3 weeks later...

post-59722-0-68050600-1422973313_thumb.j bought this to drive around for the time being

Link to comment
Share on other sites

You are definitely making progress then! Love the blue escort.

Sent from my Gen 1 WAP phone

Link to comment
Share on other sites

Nice project pal will definitely be checking to see what the car looks like when done shame about the colour tho . What's ur plan for paintwork.

Link to comment
Share on other sites

  • 2 months later...

No plans for a colour change for a while as just bought a house and must replace the roof, engine and gearbox are now back in, got a replacement 32/36 weber, needs a overhaul, next job is the wiring, I will take pics of the mess that it is in, front grill should be with me by next week, hopefully be out in the summer for a blast, as the wife has said if I want to keep this one I have to sell the xr3i, not allowed to keep both, another job yet is make an exhaust for it, try and get more done on friday

post-59722-0-39137600-1428542451_thumb.j

post-59722-0-93008000-1428542809_thumb.j

  • Like 1
Link to comment
Share on other sites

  • 2 weeks later...

Grill arrived so now all fitted and most of the wiring done, new mixture screw has eventually turned up for the carb, so hopefully get her running tomorrow

post-59722-0-86277000-1429551690_thumb.j

  • Like 1
Link to comment
Share on other sites

  • 1 month later...

Not had much time recently as new job with long hours and a new house, xr3i has gone to a new loving home, but I have bought something rather sexy for it :driving:

post-59722-0-45741200-1433027155_thumb.j

Link to comment
Share on other sites

  • 3 weeks later...

Just got a companion for her

post-59722-0-12025800-1434743769_thumb.j

  • Like 1
Link to comment
Share on other sites

So wife let you have another?

Sent via the 'Clacks'

GNU STP

Link to comment
Share on other sites

At £1500 for a 2 owner weld and rust free car for £1500 totally original she told me to get it lol

Link to comment
Share on other sites


Great news! I look forward to updates

Sent via the 'Clacks'

GNU STP

Link to comment
Share on other sites

I wish I had your money and your wife's willingness to spend it on cars - transferred to my own wife lol

  • Like 1
Link to comment
Share on other sites

Latest Deals

Ford UK Shop for genuine Ford parts & accessories

Disclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share






×
×
  • Create New...

Forums


News


Membership