Jump to content
Do Not Sell My Personal Information

Focus Titanium Mk2.5 Spoiler Swap


weybreadfocus
 Share

Recommended Posts

Hi All, i have just purchased an ST spoiler to go on my mk2.5. Is the swap straight forward?

Sent from my iPhone using Ford OC

Link to comment
Share on other sites


I think the light is a different fit as well

Link to comment
Share on other sites

Ive got the spoiler and st light but anyone know about the fitting?

Sent from my iPhone using Ford OC

Link to comment
Share on other sites

I changed mine over the other month, this may help....

imagejpg1_zps85e3c6d1.jpg

imagejpg1_zpsd28de0b1.jpg

imagejpg1_zpsb1ee0ca0.jpg

imagejpg1_zps4a4cdfe0.jpg

Jason

  • Like 1
Link to comment
Share on other sites

i bought my st spoiler with clear brake light .all i had to do was find a way to connect with out cutting wires so i waxed the inside of the plug and filled with resin and that was it .

post-32857-0-76613800-1420297276_thumb.j

post-32857-0-11084900-1420297291_thumb.j

  • Like 2
Link to comment
Share on other sites


Hi, what do you mean by waxed and filled with resin, could i not cut the connection and solder it? Then put heat shrink over the cable?

Sent from my iPhone using Ford OC

  • Like 1
Link to comment
Share on other sites

Hi, what do you mean by waxed and filled with resin, could i not cut the connection and solder it? Then put heat shrink over the cable?

Sent from my iPhone using Ford OC

you can.its up to you.i didnt want to cut wires.but if you dont mind then go for it .

  • Like 1
Link to comment
Share on other sites

Remember to use a good quality silicone when fitting the spolier or you'll end up with a wet boot

  • Like 1
Link to comment
Share on other sites

Remember to use a good quality silicone when fitting the spolier or you'll end up with a wet boot

where would need silicone ?didnt use any boot seems ok.just in case

  • Like 1
Link to comment
Share on other sites

You need it on the pads that go around the bolt holes otherwise water can leak through which eventually it does you wont notice at first to check remove the plastic cover that hides the bolts to the spoiler and attatch some tissue paper to the inside with a bit of tape after heavy rain pop it off if theres a leak you'll know most on here have done it anyway seal it as those pads when they get too wet just leak

  • Like 1
Link to comment
Share on other sites

You need it on the pads that go around the bolt holes otherwise water can leak through which eventually it does you wont notice at first to check remove the plastic cover that hides the bolts to the spoiler and attatch some tissue paper to the inside with a bit of tape after heavy rain pop it off if theres a leak you'll know most on here have done it anyway seal it as those pads when they get too wet just leak

I add silicone around my bolts to prevent any leaking

  • Like 1
Link to comment
Share on other sites

I have a fitting guide in the guide links under this post.

  • Like 1
Link to comment
Share on other sites

Fitted! :) thanks for all your help guys appreciate it!

Sent from my iPhone using Ford OC

  • Like 3
Link to comment
Share on other sites

Did you use my guide and if so was it of benefit to you?

  • Like 1
Link to comment
Share on other sites

Yes very helpful, thanks Stoney

Sent from my iPhone using Ford OC

  • Like 2
Link to comment
Share on other sites


if i remember rightly i used pond liner and made washers for the bolt holes.

  • Like 2
Link to comment
Share on other sites

I used bathroom silicone around the bolt holes,

I also used the head and arm off the household vacuum cleaner:

Jammed it between brake pedal and drivers seat simulating foot on pedal.

This activated the brake light enabling you to find the correct polarity of cables to get the led brake light working prior to permanently connecting the cables.

Alternativly you could ask your missus to press the pedal but generally she won't be in cooperation mode while you're modifying the car,

So the vacuum cleaner arm and head are a good alternative.

  • Like 2
Link to comment
Share on other sites

i just used the reflection in the front room window,as ive got a drive.

Link to comment
Share on other sites

i just used the reflection in the front room window,as ive got a drive.

And you've got a front room window :)

You Da Man Bro!!

Link to comment
Share on other sites

Latest Deals

Ford UK Shop for genuine Ford parts & accessories

Disclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share






×
×
  • Create New...

Forums


News


Membership