huey45 Posted January 20, 2015 Share Posted January 20, 2015 Hi Guys I seen a video on you tube how to do this, it says hold down OK button on steering wheel for 5 seconds, then press start button to go into accessory mode, then continue holding OK button till test appears on screen, then release and you can then select tests by up/down buttons, i can get that far, but dont get guage sweep or led tests, am i doing something wrong The video was on Yank Focus, do they mean mileage reset on right of our steering wheels in U.K ? Quote Link to comment Share on other sites More sharing options...
jeebowhite Posted January 20, 2015 Share Posted January 20, 2015 its the right method, but once you see the word test on screen, let go, and then press OK to circle through the menus. The same applies if you are using a key, turn ignition to off, press and hold, then start the car to electrics, or full ignition and this will access the menu. Quote Link to comment Share on other sites More sharing options...
huey45 Posted January 20, 2015 Author Share Posted January 20, 2015 I must be doing something wrong, as described in query, I used L/H OK button held it for 5 secs, then pressed power button once to go into accessory mode, and continued to hold OK button till Test appeared, then I let go leaving test still displayed on screen then if I press OK button, I can cycle through tests, but no gauge sweep or led tests appear or come on, just colour tests and text for different functions tests, maybe my 2012/62 plate Tit dont support these tests ?? Quote Link to comment Share on other sites More sharing options...
jeebowhite Posted January 20, 2015 Share Posted January 20, 2015 It should do, did you circulate all the way through until you reached test again? Quote Link to comment Share on other sites More sharing options...
huey45 Posted January 20, 2015 Author Share Posted January 20, 2015 Hi yes I went through everything Test to Test, no gauge sweep or LED tests !! puzzled now... Quote Link to comment Share on other sites More sharing options...
iantt Posted January 20, 2015 Share Posted January 20, 2015 After pressing ok button try using the uo and down buttons to scroll through each test, that works on 2013 focus Quote Link to comment Share on other sites More sharing options...
huey45 Posted January 20, 2015 Author Share Posted January 20, 2015 Hi I did that got colours test, pattern check, about system info etc etc , nothing else after cycling time and time again...?? Quote Link to comment Share on other sites More sharing options...
huey45 Posted January 20, 2015 Author Share Posted January 20, 2015 Reading what I got in test mode, Serial Number B6H00V170433, Software Version 1.7.11 Could this have any bearing on it, I dont know what latest software should be for my car and if out of date, how can I get to download it ? without dealer rip off !! Quote Link to comment Share on other sites More sharing options...
Figgis41 Posted January 20, 2015 Share Posted January 20, 2015 if its still under warranty take it to the dealership and tell them the trip computer keeps freezing and reseting etc,,, ask if there's a firmware update and they will install it with no charge. :) Quote Link to comment Share on other sites More sharing options...
Figgis41 Posted January 20, 2015 Share Posted January 20, 2015 hi again,,, just thinking i read there was an update so the trip compy display showed milage top left instead of avarage mph when in the quad display,,, so if yours still shows MPH then there is an update. I have a 2012 Titanuim so i will give it a shot tomorrow and see what mine does. Quote Link to comment Share on other sites More sharing options...
huey45 Posted January 21, 2015 Author Share Posted January 21, 2015 Hi Figgis41 Will be interested in what you find doing test on yours what you find then maybe you can give me a step by step through it ? afterwards i can replace some of hair pulled out thanks in advance Quote Link to comment Share on other sites More sharing options...
huey45 Posted January 21, 2015 Author Share Posted January 21, 2015 Hi Figgis41 Just been out and looked my multi display, Top left I have Avg Speed, Top right Avg Fuel Bottom left Instant Fuel, Bottom right Trip odometer Can you do hidden tests, and give info on Serial number xxxxxxxxxxxx, Software version xxxxxx, Date, and so on Your build year by FordEtis or whatever Also can you do the Gauge sweep and Led tests on yours, by what method are you using ? I will compare with mine, before going to dealers if needed ?? Quote Link to comment Share on other sites More sharing options...
Figgis41 Posted January 21, 2015 Share Posted January 21, 2015 hi,, i just tried it and did not get the gauge sweep either,, software version is 07/09/01 if thats any good to you. Quote Link to comment Share on other sites More sharing options...
huey45 Posted January 21, 2015 Author Share Posted January 21, 2015 Looks like Ford owes us some software upgrades, free or paid ?? Quote Link to comment Share on other sites More sharing options...
jeebowhite Posted January 21, 2015 Share Posted January 21, 2015 haha, free.... oh you do make me laugh :D Quote Link to comment Share on other sites More sharing options...
iantt Posted January 21, 2015 Share Posted January 21, 2015 Is there a problem with your instrument cluster? Quote Link to comment Share on other sites More sharing options...
huey45 Posted January 21, 2015 Author Share Posted January 21, 2015 Ford would even charge you for the correct time, their after service is a pure joke..but having said that I love my Focus.. Quote Link to comment Share on other sites More sharing options...
huey45 Posted January 21, 2015 Author Share Posted January 21, 2015 To be honest, thats what I am trying to determine, it will not do part of self tests Quote Link to comment Share on other sites More sharing options...
iantt Posted January 21, 2015 Share Posted January 21, 2015 So if theres nothing actually wrong with your instrument cluster then I would leave well alone, clue is in the title , secret mode! Ford wont do update unless there is a general dislay fault with cluster in normal running mode. Updating any module is not recommened unless there is a fault. Sometimes it causes other faults to appear , so you end up causing more problems than it fixes Been there done that, as the saying goes Quote Link to comment Share on other sites More sharing options...
huey45 Posted January 21, 2015 Author Share Posted January 21, 2015 Hi iantt Im inclined to agree with you on that statement, having seen it I wanted to try out but as you said might be more trouble than worth.. Quote Link to comment Share on other sites More sharing options...
Figgis41 Posted January 21, 2015 Share Posted January 21, 2015 hi,,, being an engineer i go by the adage,, if it aint broke dont fix it,, so im ok with mine :) but if you want an upgrade and you dont want to pay get it done on the warranty and tell them your trip computer keeps freezing intermitantly and first thing they will do is upgrade the firmware. Also you dont have to take it to a main dealer for warranty work, i take my car to 2 ex ford Tech's who have set up their own biusness and a re doing very well. good luck Quote Link to comment Share on other sites More sharing options...
jeebowhite Posted January 21, 2015 Share Posted January 21, 2015 Just for the self test it isn't worth it, however I just saw a vid of a 2012 titanium with teat mode triggered by accessory mode (holding ok as you turn to position 2) and at the word test, the guy pressed the down key for gauge sweep. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Ford UK Shop
Sponsored Ad
Name: eBay
Ford Model: FordUK Shop
Ford Year: 2024
Latest Deals
Ford UK Shop for genuine Ford parts & accessoriesDisclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.