Elm 327 500K Diagnostics Cable.

[Mart7379]

Hi guys I am sorry if this is in the wrong part of the site but didn't know where else to put it.

I recently bought a ELM 327 modified Diagnostic cable for my C-max as I have a few issues I would like to investigate. I have downloaded FORSCAN as it was recommended on this forum, but when I plug the cable in then into the car (vice versa) it's coming up ELM not found. I presume I would need drivers for the cable. I did get a disc but I don't know where I put it. I'm hoping someone can direct me to somewhere I can download drivers I.e. A direct link

Thanks guys

Sent from my iPhone using Ford OC

[iantt]

Drivers will be on disc, or should be.

I had problems with my elm327,(elm not found) had it swapped for a different one with a different chipset inside.

[jeebowhite]

You need to install the drivers thats for sure, what version of Windows are you using?

[jeebowhite]

If you want the drivers that we often refer to....

http://www.mediafire.com/download/so2x2ulcz510kzr/SiLabs.zip

[Mart7379]

Hi guys thanks for the response I managed to find the disc that came with the cable and successfully installed the drivers. Codes read are on my other post in the CMax forum.

Sent from my iPhone using Ford OC