Jump to content


Show
Photo
- - - - -

Refuelling problem


  • Please log in to reply
18 replies to this topic

#16 Flic

Flic

    Area Rep: Southeast 2 (Chrome Hater)

  • New Member
  • PipPipPipPipPip
  • 1,159 posts
  • Ford Model: 09 Fiesta Zetec-S
  • Location:

Posted 27 July 2009 - 10:26 PM

This might call for another topic. "Can fuel/Can't fuel" :lol:


Or Can't fuel won't fuel? Like can't cook won't cook...? I'll get my coat...

Have something to contribute?

Sign in or register to start a topic...

Sign up to FOC Premium Membership To Remove These Ads

#17 irononreverse

irononreverse

    Too much time on the boards

  • Budding Enthusiast
  • PipPipPipPip
  • 855 posts
  • Ford Model: Ford Fiesta Zetec Mk7

Posted 27 July 2009 - 10:29 PM

I've refuelled four times now and it's gone fine each time. The one time I spilt petrol was because there was still some in the nozzle when I picked it up and it went all over me! blech!

#18 AndyN

AndyN

    Newbie

  • New Member
  • Pip
  • 1 posts
  • Ford Model: Fiesta
  • Location: Wiltshire

Posted 13 December 2012 - 09:50 PM

I have had a nightmare refuelling my Fiesta 1.6tdci s diesel. all the same problems the other guys (who have had problems) have had, infact according to the RAC it is a "known" problem...I had to call them out tonight as i could not get a drop in this time, where as normally i can manage to get some in after moving the filler nozzle around at many different angles. What they suggested i did was just push the nozzle in all the way,then let go of the handle so it sat in the filler "el natural" then slowly squeeze the trigger... it filled up a treat ..tho i did get some fuel coming out the overflow pipe as normal... For you that have not had the problem "yet" i hope you dont get it... those who have had it have probably been looking for a new car like i have. good luck

#19 iNath

iNath

    ST-2 Mod

  • Super Mod
  • 3,557 posts
  • Name: Nathan
  • Ford Model: Molten Orange Fiesta ST-2
  • Year: 2013
  • Location: Buckinghamshire
Contributor

Posted 13 December 2012 - 10:12 PM

Next time you fill up look at the nozzle, you'll notice some notches on it. You need to insert the nozzle until the first notch is just past the edge of the filler and hook it over. Then 'drop' the nozzle to adjust the angle and squeeze trigger to fill.
Once I learned this method I never had an issue again.

Posted Image


Not what you're looking for?

Register now, we have a huge community of enthusiasts to answer any questions you might have



0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users