mattdavies Posted April 13, 2015 Share Posted April 13, 2015 Hi all please help. I need to change the wheel bearing on my 2003 transit minibus. It's the front drivers side that I am changing. I need to find out the torque setting for the middle nut if possible. I know it's a 35 mm but when looking on Google it mentioned 420 nm which I think is a bit excessive to say the least. Please help if possible Matt Quote Link to comment Share on other sites More sharing options...
iantt Posted April 13, 2015 Share Posted April 13, 2015 thats the right torque, you should fit a new nut and washer, pinch nut up, rotate wheel 5 times, torque 250nm, rotate wheel 5 times, torque 420nm job done. Quote Link to comment Share on other sites More sharing options...
mattdavies Posted April 13, 2015 Author Share Posted April 13, 2015 That's what I read just seemed way too much. Quote Link to comment Share on other sites More sharing options...
iantt Posted April 13, 2015 Share Posted April 13, 2015 nope, done hundreds of them , Quote Link to comment Share on other sites More sharing options...
mattdavies Posted April 13, 2015 Author Share Posted April 13, 2015 Where would I get a torque wrench to cope with that pressure please Quote Link to comment Share on other sites More sharing options...
iantt Posted April 13, 2015 Share Posted April 13, 2015 you might have to borrow one,expensive to buy one for just 1 job.have you removed bearing yet? Quote Link to comment Share on other sites More sharing options...
mattdavies Posted April 13, 2015 Author Share Posted April 13, 2015 Not as yet, doing everything on Wednesday Quote Link to comment Share on other sites More sharing options...
iantt Posted April 13, 2015 Share Posted April 13, 2015 good luck. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.