Jump to content
Do Not Sell My Personal Information

Kpgs Mk3 Focus Titanium


kpg
 Share

Recommended Posts

Won't make any difference to performance without a map to take advantage of it.

Anyone know how well the tivct engine reacts to remapping? I'm guessing not well due to the whole oil pressure/timing/variable valve stuff ?

Sent from my iPhone 5s.

Link to comment
Share on other sites


Had a longish run today. Can feel a slight difference. Engine sounds more snarly and it seems like acceleration has increased slightly...

Sent from my iPhone 5s.

Link to comment
Share on other sites

I'm in Paris right now so haven't had a chance to update anymore on the air filter other than the cars feels slightly more lively and, it could be me but, when the traction control is off its even livlier in this mode than before the air filter.

Since I'm in Paris I didn't some window shopping:

post-41109-144334582866_thumb.jpg

post-41109-144334583735_thumb.jpg

post-41109-144334584569_thumb.jpg

post-41109-144334585534_thumb.jpg

post-41109-144334586585_thumb.jpg

post-41109-144334587625_thumb.jpg

I'll take the red Huracan and the DBS cabrio ! :-)convertible

Sent from my iPhone 5s.

  • Like 1
Link to comment
Share on other sites

Just going to leave this here....

post-41109-144388550264_thumb.jpg

Can you guess what I'm up to :) ?

Sent from my iPhone 5s.

  • Like 1
Link to comment
Share on other sites


Christmas presents already? ;)

You're on the right track lol but no !

Sent from my iPhone 5s.

  • Like 1
Link to comment
Share on other sites

I decided that the gloss black was a magnet for dust, or just dust was very visible on it. Ether way I started wrapping the dash console in carbon :) !

post-41109-144389005735_thumb.jpg

post-41109-144389006599_thumb.jpg

post-41109-144389007966_thumb.jpg

post-41109-144389009101_thumb.jpg

post-41109-144389010023_thumb.jpg

I ran out of material so will complete the gearstick surround and swoopy bit next time.

Sent from my iPhone 5s.

This is how the ST should come with carbon trim !

  • Like 2
Link to comment
Share on other sites

Another small mod I did at the weekend was to improve the lighting in the boot as moving guitars and amps in the dark is a pain. I scored two signage led units from work and wired them up using two spare 501 adaptors I had laying around. Much better spread now as you can see:

post-41109-144398528862_thumb.jpg

post-41109-144398529868_thumb.jpg

post-41109-1443985309_thumb.jpg

I usually have nothing in the boot so don't mind the mess.

Sent from my iPhone 5s.

  • Like 1
Link to comment
Share on other sites

Another small mod I did at the weekend was to improve the lighting in the boot as moving guitars and amps in the dark is a pain. I scored two signage led units from work and wired them up using two spare 501 adaptors I had laying around. Much better spread now as you can see:

attachicon.gifImageUploadedByFord OC1443985287.979737.jpg

attachicon.gifImageUploadedByFord OC1443985297.930060.jpg

attachicon.gifImageUploadedByFord OC1443985308.246986.jpg

I usually have nothing in the boot so don't mind the mess.

Sent from my iPhone 5s.

Looks good! Shame about the wheel arches blocking the light :(

Sent from my HTC One_M8 using Tapatalk

Link to comment
Share on other sites

Looks good! Shame about the wheel arches blocking the light :(

Sent from my HTC One_M8 using Tapatalk

Yea I realised while fitting them that there would be issues with light spread still. Fitting them flat would just spread light straight across the boot and fitting them at a slant, which I've done would create shadows. I'm pretty sure they're positioned for optimum light.

Sent from my iPhone 5s.

  • Like 1
Link to comment
Share on other sites

That's what annoys me is the shadows. I've given up on so many plans to light the boot because of the arches :(

Sent from my HTC One_M8 using Tapatalk

Link to comment
Share on other sites

suspension is one of those items where you really do get what you pay for , and quality costs.

so on that basis a full coil over kit for just over £200 is likely to be pants to be honest.

  • Like 1
Link to comment
Share on other sites

suspension is one of those items where you really do get what you pay for , and quality costs.

so on that basis a full coil over kit for just over £200 is likely to be pants to be honest.

Thanks for your views. I would rather do springs but I've seen/heard reports of the H&R not lowering enough at the front of the MK3. Which puts me off.

Sent from my iPhone 5s.

Link to comment
Share on other sites

Suspension is a black art. There's too much rubbish out there claiming this and that. Since you have a titanium best bet is to source zetec S springs and dampers. Tried and tested by Ford and countless owners. Excellent what you've done to your car. Like the carbon wrap. May just do my titanium x (deep impact blue ) as it'll suit my full leather interior.

  • Like 1
Link to comment
Share on other sites


agree with the above sentiment with regards to keeping it stock.

if you're happy with a drop of no more than 30mm then a set of Eibach sport springs is ideal

good quality units that ford themselves use for suspension upgrades.

  • Like 1
Link to comment
Share on other sites

agree with the above sentiment with regards to keeping it stock.

if you're happy with a drop of no more than 30mm then a set of eibach sport springs is ideal

good quality units that ford themselves use for suspension upgrades.

Thanks for the advice guys. Will think a bit more on the subject before diving in.

Sent from my iPhone 5s.

Link to comment
Share on other sites

Ok all is done now, even the door handles.

post-41109-144415795548_thumb.jpg

post-41109-14441579717_thumb.jpg

post-41109-144415798295_thumb.jpg

post-41109-144415799555_thumb.jpg

post-41109-144415800637_thumb.jpg

post-41109-144415801673_thumb.jpg

Quite pleased with the results.

Sent from my iPhone 5s.

  • Like 1
Link to comment
Share on other sites

does the gearknob just unscrew ? standard anti-clockwise direction ?

crapshoot lol , i gave mine a right good heave but it but it didnt budge lol

  • Like 1
Link to comment
Share on other sites

does the gearknob just unscrew ? standard anti-clockwise direction ?

crapshoot lol , i gave mine a right good heave but it but it didnt budge lol

Yea it's a standard unscrew. Quite easy but there's more pieces of trim attached to the gaitor than I thought.

Sent from my iPhone 5s.

  • Like 2
Link to comment
Share on other sites

Can plz do my interior now.

Lol send me the parts and I'll wrap them

Sent from my iPhone 5s.

Link to comment
Share on other sites

Latest Deals

Ford UK Shop for genuine Ford parts & accessories

Disclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share







×
×
  • Create New...

Forums


News


Membership