markanthony Posted September 5, 2015 Share Posted September 5, 2015 Hi, I am having probs with my airbag light, mot due in a week & have had the problem narrowed down to the passenger curtain airbag, I have seen resistors to fool the airbag ecu but I need to know the ohm's resistance & if the bag is a single or dual deployment? Quote Link to comment Share on other sites More sharing options...
markanthony Posted September 7, 2015 Author Share Posted September 7, 2015 As per usual here I figured it out myself, its 2.2 ohms & the curtain airbag plug is located above the rear side windows, there is a plastic 30cm aprox panel that you just prise off then 3 screws under it to drop another panel, this reviles the plug that is connected to the air bag, you will need a 2 amp mini fuse soldered to a 2.2 ohm resistor then heat shrink the whole thing leaving the ends exposed, plug the exposed ends into the airbag plug & the light should stay out, I would only recommend this as a test method or to get you through an mot if you have no time. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Ford UK Shop
Sponsored Ad
Name: eBay
Ford Model: FordUK Shop
Ford Year: 2024
Latest Deals
Ford UK Shop for genuine Ford parts & accessoriesDisclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.