Jump to content
Do Not Sell My Personal Information

Fiesta Wind Deflectors 2012 Model Onwards.


Cookey09
 Share

Recommended Posts

Alright guys and girls, I'm really interested in having my rear windows tinted, I'd have the front two done... But as we all know, they are illegal, so, I'm looking to install wind deflectors - to look the part and help blend the light to dark tint... Aswell as the initial purpose of reducing the wind noise...

Anybody got any to recommend?

I've got a 5 door fiesta zetec, looking to get the deflectors for both front and rear windows.

Thanks in advance. Cookey.

Link to comment
Share on other sites


It's either climair (from a ford dealer or fordpartsuk) or team heko from eBay.

Both are very similar heko come with metal clips to keep them in place ( sometimes aren't needed).

Deflectors can scratch the top edge of the glass, either make sure you keep the glass clean or fit a strip of self adhesive felt along the top edge of the deflector.

  • Like 1
Link to comment
Share on other sites

The Heko's don't tend to scratch the window as the clips separate the window from the deflector, They're both as good as eachother at the end of the day though. Climairs are a little pricier if I remember rightly as well

  • Like 1
Link to comment
Share on other sites

Looking to fit wind deflectors myself, but doubt I would use them for their purpose and just a style element on the car, as I have climate control...and just looking to put them on the front windows, too. I know someone who has Heko on their Corsa and they look pretty good.

  • Like 1
Link to comment
Share on other sites


Fantastic replies guys, any links would be useful, I've had a look round, but would like the climair ones to say sport on them... Picky... I know. If not, it's fine. I've seen some, could just do with links on what people have bought. Regards, the team Heko ones, I haven't actually had a look at them.. So links would be great. I'm not lazy, I will have look myself now, I just don't want to mugged off from eBay and buy dodgy ones...

Cookey.

Link to comment
Share on other sites

  • 3 months later...

So, fitted my wind deflectors today. Easy enough. Didn't use the metal clips for the team heko's. Just the self adhesive tape. 

One issue. The drivers side one. Seems to be. How can I put this? 

Slipping? 

Only a fraction though. 

Going to leave my windows up for a couple of days to let them set. 

But anyone else had this issue?

Link to comment
Share on other sites

Use the clips to stop them slipping :smile:

  • Like 1
Link to comment
Share on other sites

22 hours ago, MONDEO TXS 2.2 said:

Use the clips to stop them slipping :smile:

Will do matey. How do the clips work? 

Seems like a daft question. But they're in the car. It's cold, dark and wet outside...

it just seems to be my drivers side deflector that's the issue. Keeps slipping and moving. And maybe catching on the window? 

Link to comment
Share on other sites

The clips simply push into the window channel in the door frame - use a wide bladed wallpaper scraper or credit card to push them in & make sure the barbs are the right way round - instructions should have come with the parts ?

Link to comment
Share on other sites

1 hour ago, MONDEO TXS 2.2 said:

The clips simply push into the window channel in the door frame - use a wide bladed wallpaper scraper or credit card to push them in & make sure the barbs are the right way round - instructions should have come with the parts ?

Cheers matey. And nope. No instructions. There was a diagram of slide the deflectors in place. Literally a two step diagrams for taking the deflector out of the packet and sliding it in... 

 

no more detail as what to do with clips etc...

does the clip rest in the channel so it is split? With the glass between the clip?

Link to comment
Share on other sites

So tried re-fitting my drivers side deflector using the clip. Not a prayer with it. No idea how it works. Its way too big for the channel? If I cant do it or find any guides or tips. Im going to throw teddy out of cot and scrap the idea...

Link to comment
Share on other sites

Just tried again and the clip squeezed into the channel. Scratching the deflector. After work. Am taking them off. Too much hassle. Looks smart. But way too much hassle. 

Link to comment
Share on other sites

Climairs on mine, No scratching / no clips & no self adhesive :cool: 

IMG_20160112_113110.jpg

  • Like 1
Link to comment
Share on other sites

Latest Deals

Ford UK Shop for genuine Ford parts & accessories

Disclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share






×
×
  • Create New...

Forums


News


Membership