VCM II clone problems

[lollapalooza]

Hello,

I've got a VCN II from Aliexpress, but I can't manage to have it working.

When I plug it to the laptop, I can't hear any "ding-dong" ... so the laptop does not find the VCM II.

 

On the VCM only the "car" led is lit (steady on), other leds are off.

 

I tried to use the recovery procedure, by keeping pressed the reset switch, but the only difference I see is with the leds: car led stays on, after a few seconds also "PC" and "power" led goes on for a while, and then back off. I don't hear any beep coming from the device, and still the laptop does not find the plugged hardware.

 

Any suggestion?

[1.6 tdci zetec s]

Send it back for replacement. It sounds faulty, don't open it to check the terminals are OK, this will void your warranty, aliexpress good for returnin/replacing