Reverse parking sensors

[rickyp]

As above im gonna fit a set myself and was wondering if anyone else had done it and any recommendations or ones to avoid etc..?

looking at these ones i think

http://www.parkingsensors.co.uk/dolphin_au...ing_sensors.asp

[dezwez]

As above im gonna fit a set myself and was wondering if anyone else had done it and any recommendations or ones to avoid etc..?

looking at these ones i think

http://www.parkingsensors.co.uk/dolphin_au...ing_sensors.asp

a lot cheeper on feabay

not that bad to fit they come with a hole cuter

[Tx1oss]

As above im gonna fit a set myself and was wondering if anyone else had done it and any recommendations or ones to avoid etc..?

looking at these ones i think

http://www.parkingsensors.co.uk/dolphin_au...ing_sensors.asp

I got a set from the famous auction site for around £21, fitting was a doddle I removed the rear bumper and discovered after that it wasn't neccesar. there is enough room on the 52 plate focus to drill the hole insert the wire and sensor and feed it through the same grommet that holds the reversing light cable. Job could be done in as little as 30 minutes. If you have access to the Ford manual on Cd it even shows the measurements. let me know if you need any more info.

Ossie

[catch]

As above im gonna fit a set myself and was wondering if anyone else had done it and any recommendations or ones to avoid etc..?

looking at these ones i think

http://www.parkingsensors.co.uk/dolphin_au...ing_sensors.asp

see my post on THIS thread