Jump to content
Do Not Sell My Personal Information


wont start


jimhinn
 Share

Recommended Posts

ford fusion 2 wont start nothing on the key. all that is on the dash is the oil,abs and door open warning

also will not connect with pcm please help

Link to comment
Share on other sites


i would be checking fuses, if you've got no ignition you will not be able to connect to pcm

Link to comment
Share on other sites

11 hours ago, leesid said:

i would be checking fuses, if you've got no ignition you will not be able to connect to pcm

You are spot on Lee, unfortunately when the OP can't be bothered to mention if such things as the sidelights, radio, interior light, door locking etc are working or not you have to start at the beginning. I have seen on too many occasions after ploughing through wiring diagrams to find it was the battery all along.

 If he has a code reader the saying "All the gear, no idea" springs to mind.

  • Like 1
Link to comment
Share on other sites

on the speedo theres no mileage or fuel gauge reading and all other electrics work except for the interior lights batt has 13.4 v

Link to comment
Share on other sites


Check for 12 volts at fuses 14,15,16 and 20 (key does not need to be in).
Do not remove the fuse from the fuse-board, just probe the metal pins ether side of the number printed on the fuse.

Also check fuse 38 (as above) with ignition key in position II

 

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share




×
×
  • Create New...

Forums


News


Membership