Micro Posted April 25, 2016 Share Posted April 25, 2016 Hi guys! Had a look at the jacking picture in the owners manual and online - unfortunately matching that to the underside of the car was a bit difficult! I have been using the sills to raise the vehicle, but for the front I'm a bit stuck as to where to put the stand. I was either thinking here, or the bolt next to it (in the picture) as it seems to attach to the frame. Can you guys advise if that's a good place? Quote Link to comment Share on other sites More sharing options...
dezwez Posted April 25, 2016 Share Posted April 25, 2016 I place mine on the big bolthead seen in your picture. Not were you have it that looks like a bush I place 1 Quote Link to comment Share on other sites More sharing options...
artscot79 Posted April 26, 2016 Share Posted April 26, 2016 cant really miss the jacking point its indented and reinforced anywhere else is a risk Quote Link to comment Share on other sites More sharing options...
TomsFocus Posted April 26, 2016 Share Posted April 26, 2016 The problem is you can't fit jack and stands on the jacking point Arthur. Micro, I would also use the bolt to the right in your picture, where the subframe bolts to the car. Also, the stand needs to be higher so you can get that locking pin in ideally. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Ford UK Shop
Sponsored Ad
Name: eBay
Ford Model: FordUK Shop
Ford Year: 2024
Latest Deals
Ford UK Shop for genuine Ford parts & accessoriesDisclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.