Door panel removal guide

[Jonanstee]

Hey guys. My speaker has blown but I can't work out how to remove the door panel to change it. I've followed one on penny's guides by removing the two bolts under the handle but can't work out what to do from there? Anyone know how to. I don't want it breaking but desperately need it off.

thanks

jonanstee

[sean.kerwin]

On the back doors. There are small bolts on the bottom of the door I believe, I can't remember, but I do remember the 3 bolts from the handle and hen giving it a yank on the edges. It's held in place by alot of clips.

Sent from my iPhone using Tapatalk

[sean.kerwin]

Ps, have fun removing the riveted Speakers

Sent from my iPhone using Tapatalk

[Jonanstee]

So it's a case of after undoing the bolts just pulling it hard?

[simcor]

Have a look in my signature there's a link to a PDF of a Haynes manual. At work on phone so can't have a look at it.

[sean.kerwin]

That's how I did it

Sent from my iPhone using Tapatalk

[simcor]

They are usually held on with body clips around the edges. Yanking it off will very likely break the clips and you can damage the door panel doing so. Use a long bladed screwdriver or pry bar to get under the panel around where the clips are and prise them out one by one is the best way of doing it. You can buy trim removal tools to do this also like a forked pry bar basically. 

[Stoney871]

Trim tools are very handy.

I prefer Bojo.

Sent from my SM-G930F