Exhaust hangers

[Gabbo_21]

Hi guys, picked up a new tail pipe thanks to Lenny, who also included the N/S hanger from an ST.

I've notice that the fixing holes in the hanger do not match, if anything they are a mirror of the exhaust bracket. Anyone have any idea why? Or what part I need instead?

Sent from my iPhone using Tapatalk

[Gabbo_21]

As per pic below, fixing holes different

Sent from my iPhone using Tapatalk

[ajzetecs]

think you just need to turn it around mate the hanger should be facing in towards the car

[Lenny]

7 hours ago, Gabbo_21 said:

As per pic below, fixing holes different

Sent from my iPhone using Tapatalk

Here's the Ford parts mate 

Passenger hanger is: 130395

 

Drivers hanger is: 130393

(this is one you have in hand)

 

 

 

 

Here is a picture of the drivers side exhaust mount which you have in your hand there; fitted to my focus 

Rear of focus is to the left of the image, exhaust tip is on left side of this image below👇

 

Andrew is right; just need to turn it around 👌

 

Also here's drivers side:

 

not sure if you will need to purchase passenger side part number: 130395

 

Both exhaust hangers are essentially the same with the exception of hole formation for bolting to chassis frame👍

 

I purchased both at home of fitting and provided them to souhans alpng with the exhaust and got nothing back so i assumed both were required but the stock passengers side hanger; may be the same I don't know and couldn't supply as souhans used it to hang my replacement single pipe. 

 

 

[Gabbo_21]

think you just need to turn it around mate the hanger should be facing in towards the car

Ajzetecs rotate it and holes still work out same way and to far from each other

[ajzetecs]

Does any bracket fit on any side, a put mine on will which ever one fitted correct first