AlexBartlam Posted September 8, 2016 Share Posted September 8, 2016 can i ask where you got the rear defuser from really like the look of it and how much was it to get painted. Quote Link to comment Share on other sites More sharing options...
supraking Posted September 19, 2016 Author Share Posted September 19, 2016 hey buddy. i bought the whole rear bumper off the facebook buy and sell page https://www.facebook.com/groups/802621073105584/ this cost me 110 delivered. i sold the spats off it as i didnt need them, which made me £20 i then took the diffuser to my local very good body shop (pearl paint i wanted it to be perfect first time) this cost 80 quid so all in it was 170 and the honeycomb plastics are marked in places. you can buy both parts straight from ford for about the same as i paid for my second hand bits. then the diffuser will need painting. or if you have a more standard colour, say white. it would be cheaper to paint, more around 50 quid or you could buy a used one for about 100 quid and bang it straight on. 1 Quote Link to comment Share on other sites More sharing options...
AlexBartlam Posted September 19, 2016 Share Posted September 19, 2016 nice one thanks, ill look at doing this in the new year when iv got the funds Quote Link to comment Share on other sites More sharing options...
supraking Posted September 19, 2016 Author Share Posted September 19, 2016 theres a white one for sale atm for £60/70 lol Quote Link to comment Share on other sites More sharing options...
karl46 Posted September 19, 2016 Share Posted September 19, 2016 I found that 2 aerosol cans and a tad of patience does a very good job at a fraction of the price of a spray shop. 1 Quote Link to comment Share on other sites More sharing options...
AlexBartlam Posted September 20, 2016 Share Posted September 20, 2016 yh i saw it im dying lol, havnt got the money for a couple months lol i have 'responsibilities' im sure there will be another one when the time comes. fingers crossed 1 Quote Link to comment Share on other sites More sharing options...
supraking Posted September 20, 2016 Author Share Posted September 20, 2016 karl, normally id have gone down that route tbh (not that i have a lot of paitence) however i wouldnt have been able to do my pearl blue, and as the car is fairly new i didnt want any botched diy jobs on it did these the other day, all 4 done and back on in 3 hours, one tin of hammerite :) alex, i understand buddy. im having to lay off mods of either car for a little bit Quote Link to comment Share on other sites More sharing options...
EmmaKitkat27 Posted March 7, 2017 Share Posted March 7, 2017 On 31/05/2016 at 10:38 PM, supraking said: S badge And another bath as Mrs went to Blackpool and it was covered in sand Could you please tell me the easiest way to fit the 'S' badge? I've just got a blue one for my Mk7 Fiesta ZS and I'm wondering how you get the nut tight enough on the back with having no way to get your arms up or down the back of the grill. Wouldn't want it to come loose, I'm thinking Loctite on the screwed bar into the 'S' part so it won't fall off on that front. Any help would be much appreciated :) Cheers! Quote Link to comment Share on other sites More sharing options...
AlexBartlam Posted March 7, 2017 Share Posted March 7, 2017 simple to do i got the bolt where i wanted it behind the honeycomb and had two fingers or one (cant remember) holding it on with the other hand i then screwed mine onto the bolt till it was tight, no glue or anything was used and iv had mine close to 4-5 months its been through jet washes and had a sponge over it to clean it and stayed where it is. 1 Quote Link to comment Share on other sites More sharing options...
karl46 Posted March 7, 2017 Share Posted March 7, 2017 Remove the grill, It's only held on by locking tabs, 1 Quote Link to comment Share on other sites More sharing options...
OPLxx Posted March 7, 2017 Share Posted March 7, 2017 Such a nice car :O Quote Link to comment Share on other sites More sharing options...
EmmaKitkat27 Posted March 8, 2017 Share Posted March 8, 2017 Thanks @AlexBartlam and @karl46. I will have a go over the weekend :D Quote Link to comment Share on other sites More sharing options...
supraking Posted March 13, 2017 Author Share Posted March 13, 2017 sorry guys ive been neglecting the site, as ive had other stuff going on thank you @OPLxx i love it, not looking quite this clean at the moment, due to weather/work/some ***** nicking my jetwash the s badge, i find its easiest to make it up, poke i through then tighten the S from the front, takes a bit of trial and error to make it straight, but easier than taking things apart Quote Link to comment Share on other sites More sharing options...
supraking Posted July 8, 2018 Author Share Posted July 8, 2018 slight update, i did some bits to the front, vents. big mouth and eyebrows. but the fez is taking a back seat while i work on the toy 1 Quote Link to comment Share on other sites More sharing options...
zain611 Posted July 8, 2018 Share Posted July 8, 2018 Didn't know you had a project car. That green anniversary fiesta is catching my eye 🤣 Quote Link to comment Share on other sites More sharing options...
supraking Posted July 11, 2018 Author Share Posted July 11, 2018 the fiesta is more the family wagon, the proton is my daily and my toy. took it pod last month. met some old proton friends and took it down the strip. a tidy 19.18 🙂 plan is to work on the chassis and do some gymkhana track days with it, then swap the engine to something a bit quicker Quote Link to comment Share on other sites More sharing options...
supraking Posted October 21, 2018 Author Share Posted October 21, 2018 been out and about with the camera. I need to get out more with the two 1 Quote Link to comment Share on other sites More sharing options...
supraking Posted February 20, 2019 Author Share Posted February 20, 2019 not a huge amount to report. someone reversed into it, so one side has been repaired and resprayed (not as perfect as id hope either) and ive removed the vents and eyebrows Quote Link to comment Share on other sites More sharing options...
supraking Posted July 29, 2020 Author Share Posted July 29, 2020 slight update, got hold of a cheap set of tsw venoms. down to 15s to help with pot holes and cheaper tyres. plus they are black and i dont have to care about them as much Quote Link to comment Share on other sites More sharing options...
supraking Posted March 1, 2021 Author Share Posted March 1, 2021 nothing much to report. the fez may be becoming my daily later this year and gunna get a mk4 focus estate for the lady. so the fez may get some goodies. recently its had some rear arm bushes swapped to poly bushes as they were knackered. need to do some on the front arms now too. as for the toy, that will go in the garage and finally get its engine swap and some other bits done to it 1 Quote Link to comment Share on other sites More sharing options...
supraking Posted April 23, 2021 Author Share Posted April 23, 2021 decided to treat the fez to a spoiler lip. looks great. and a stubby Antenna cause i can Quote Link to comment Share on other sites More sharing options...
supraking Posted February 1, 2022 Author Share Posted February 1, 2022 so been a while since i was here. the fiesta suffered from the lovely wet belt problem. and the oil pump had had enough. so the car went back to standard and got swapped for a kia picanto. needed a cheap runaround while in the process of buying a house. this will be kept for the mrs. and i plan on getting a mk4 focus estate st line x 182 once the house move is done so for now, the last few pics i got of the car before it went standard = also one of the toy (my current daily)in its current form. once settled this will be getting an evo engine swapped in. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.