Jump to content
Do Not Sell My Personal Information


Gearbox issue?


W.Davison
 Share

Recommended Posts

Hi, would appreciate a moment of your time for a bit of advice.

My 07 1.2 Fiesta's gear stick has felt spongy with a bit of soft resistance to change gear, the more so the more the car has been used, ie its fine when started up in the mornings and driven for a few miles. Now something has gone very wrong and I can only get first and second gear. The gear stick will go in to position in the none working gears but I get no drive at all. Have had the occasional squeak from something when changing gear when I have been accelerating to get on motorway etc for months.
I can't see anything obvious, cables are connected. Fluid ok. Original clutch at 75k, but drives fine in 1st and 2nd, no juddering going up the ramps etc.

What's it likely to be, any ideas please?

Link to comment
Share on other sites


Could be a rusty cable, also check the lever on the gearbox end where the cables connect.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share




×
×
  • Create New...

Forums


News


Membership