Jump to content


Photo

Routing CD 6000 AUX cable- help please


  • Please log in to reply
2 replies to this topic

#1 Barnes

Barnes

    Newbie

  • New Member
  • Pip
  • 2 posts
  • Ford Model: Focus
  • Location:

Posted 27 November 2009 - 08:17 PM

Hi All,

I have a Focus Zetec 06 and have just bought an AUX to 3.5mm jack cable from the local Ford dealership.

Rather than route it to the glovebox I would like to put the 3.5mm jack socket in one of the blanking plates where the screen heater switches are.

Is there enough room to run below and behind the heater and a/c switches and then into a blank or will it be a tough job to do?


Many thanks in advance.

Have something to contribute?

Sign in or register to start a topic...



Sign up to FOC Premium Membership To Remove These Ads

#2 dezwez

dezwez

    Dezwez

  • True Ford Enthusiast
  • PipPipPipPipPip
  • 5,064 posts
  • Name: Derek
  • Ford Model: ford focus 1.8 zetec mk 2.5
  • Year: 2008
  • Location: Cambridgeshire

Posted 27 November 2009 - 08:32 PM

Hi All,

I have a Focus Zetec 06 and have just bought an AUX to 3.5mm jack cable from the local Ford dealership.

Rather than route it to the glovebox I would like to put the 3.5mm jack socket in one of the blanking plates where the screen heater switches are.

Is there enough room to run below and behind the heater and a/c switches and then into a blank or will it be a tough job to do?


Many thanks in advance.

should be do a bull theres a bit of room behind the radio the switchs are just below this i think mines a 52 focus ;)
try it

#3 886343

886343

    Member

  • New Member
  • PipPip
  • 12 posts
  • Name: mike
  • Ford Model: Focus Zetec 1.6
  • Year: 2009
  • Location: Durham

Posted 20 June 2011 - 11:09 AM

Hi All,

I have a Focus Zetec 06 and have just bought an AUX to 3.5mm jack cable from the local Ford dealership.

Rather than route it to the glovebox I would like to put the 3.5mm jack socket in one of the blanking plates where the screen heater switches are.

Is there enough room to run below and behind the heater and a/c switches and then into a blank or will it be a tough job to do?


Many thanks in advance.


Hi, I'm thinking of doing the exact same thing to my 09 plate Focus Zetec, did you do this mod and was it easy enough? How do the blanking plates come out - do they just prise out using a flat edge?
Any advice welcome..

Cheers
Michael


Not what you're looking for?

Register now, we have a huge community of enthusiasts to answer any questions you might have



0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users