daddychubby Posted November 17, 2016 Share Posted November 17, 2016 I have one of these fitted to My Fusion. It switches on etc but just displays info about needing anti theft code. I have found information that it is an 'M' serial number but is that exactly the same M type Number as all the other Ford anti theft serial numbers. Any help would be much appreciated. Quote Link to comment Share on other sites More sharing options...
iantt Posted November 17, 2016 Share Posted November 17, 2016 is it the dvd player thats in the roof? have you found your serial no? Quote Link to comment Share on other sites More sharing options...
daddychubby Posted November 18, 2016 Author Share Posted November 18, 2016 I have not got the m number yet. i hope to get it out of the roof lining this weekend. Is it the normal M number decoder that can be used. Quote Link to comment Share on other sites More sharing options...
iantt Posted November 18, 2016 Share Posted November 18, 2016 no need to remove dvd player, serial number can im led to believe by pressing and holding a button, i will just check what it says. m code decoder should work Quote Link to comment Share on other sites More sharing options...
iantt Posted November 18, 2016 Share Posted November 18, 2016 Switch the DVD player ON. The DVD player will display: Keycode entry requested. PRESS and HOLD the AUX button for 5 seconds until the DVD player serial number is shown in the display. Make a note of the DVD player serial number. does that make any sense? didnt know there was an aux button on dvd player, or could be the radio? Quote Link to comment Share on other sites More sharing options...
Fused Posted November 23, 2016 Share Posted November 23, 2016 http://www.ebay.co.uk/itm/Ford-M-Serial-Radio-Unlock-Code-Escort-Fiesta-Focus-Mondeo-Transit-/291745224323?hash=item43ed5ed683:g:wj8AAOSwhcJWN9F5 Quote Link to comment Share on other sites More sharing options...
daddychubby Posted April 30, 2017 Author Share Posted April 30, 2017 Thanks for all the help. I got the number off the side of the unit. Then used the link above. It cost me £9 if I remember correctly but it worked ok with the code supplied. Thanks once again. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.