What engine do I have?

[xpeterpx]

Sorry guys, silly question alert..

I have a 2004 1.6 Edge petrol and the engine has no obvious markings on it like the 'Zetec' etc.

So what engine do I actually have - early Zetec / Duratec/ Austin Allegro

Also, does having an 04 plate make mine a Mk1.5 or still a Mk1? Or does it come down to date of registration.

Thanks as usual

 

[Incontro]

As yours is an Mk1/Mk1.5, it is the Zetec (Zetec-SE) 

Code	Years	Displacement (bore x stroke)/Type	Power@rpm	torque@rpm	Compression (:1)

1.6 Zetec-S/SE

1998-

1,596 cc (1.596 L; 97.4 cu in) (79 mm (3.1 in)x81.4 mm (3.20 in)) I4

100 PS (74 kW; 99 hp)@6000

145 N·m (107 lb·ft)@4000

11

[xpeterpx]

Thank you

[mac801123]

4 hours ago, xpeterpx said:

 does having an 04 plate make mine a Mk1.5 or still a Mk1? 

Where are your indicators? In the bumper? (Mk1) or in the headlight? (My1.5) can you take a pic of your engine or give us the reg plate? 

[Devonboy]

16 hours ago, xpeterpx said:

Sorry guys, silly question alert..

I don't think this is a silly question.

I too find the question of what engine is fitted most confusing.

[trailertrash]

1 hour ago, Devonboy said:

I don't think this is a silly question.

I too find the question of what engine is fitted most confusing.

Etis is your friend

[Devonboy]

Etis states I have a 1.6L Zetec-S PFI (100PS) engine.

When going to other websites,  i.e. to order parts, after giving my VIN and Reg. number it always comes up as a Duratec engine.

Haynes book of fables doesn't even show the Zetec engine in the manual.

[mike6688]

I had an 04 reg 1.6 Edge, it was a Zetec-S engine. I would go by what Etis says if you've checked that. If you can post a pic of your front lights somebody could check whether it's a mk1 or mk1.5. I believe it may be a mk1.5 however judging by year and that it is an Edge spec. 

[mike6688]

Just to add these are Mk1.5 headlights (with the front indicator in the headlights) if you're indicator is in the bumper as previously mentioned it's a mk1.