Jump to content


Photo

Gearknob options for a Mk1 focus?


  • Please log in to reply
3 replies to this topic

#1 bob2807

bob2807

    Newbie

  • New Member
  • Pip
  • 2 posts
  • Ford Model: Focus MK1
  • Location:

Posted 14 December 2009 - 09:23 PM

What ford knobs would work with my mk1 focus? after something different. Preferably a genuine ford screw on one.

Would this work?

Posted Image

Have something to contribute?

Sign in or register to start a topic...

Sign up to FOC Premium Membership To Remove These Ads

#2 ford focus edge

ford focus edge

    Too much time on the boards

  • New Member
  • PipPipPipPip
  • 775 posts
  • Name: Mike
  • Ford Model: Focus 2.5T ST-2
  • Year: 2008
  • Location: Cheshire

Posted 17 December 2009 - 03:26 PM

i had a ritchbook ford one put on my focus, on cold days my hand froze to it and on hot days it burned like sin so i resorted to the silver ford one again partley because of the freeing cold condtions were having recentley and partly because i was sick of my focus looking like it was owned by a chav. be VERY careful what one you choose and personally id think that one you have pictured would fit but dont quote me on it lol

Mike

#3 bob2807

bob2807

    Newbie

  • New Member
  • Pip
  • 2 posts
  • Ford Model: Focus MK1
  • Location:

Posted 18 December 2009 - 01:01 PM

Got a Fiesta ST150 one off ebay. Should fit apparently, and not look too chavvy. Got the ford sport one at the minute, and it's mainly aluminium and is freezing in the winter.

#4 Foz77

Foz77

    Member

  • Budding Enthusiast
  • PipPip
  • 15 posts
  • Name: Mike
  • Ford Model: 1.8 TDCi Zetec
  • Year: 2008
  • Location: Northumberland

Posted 19 December 2009 - 03:48 PM

i had a ritchbook ford one put on my focus, on cold days my hand froze to it and on hot days it burned like sin so i resorted to the silver ford one again partley because of the freeing cold condtions were having recentley and partly because i was sick of my focus looking like it was owned by a chav. be VERY careful what one you choose and personally id think that one you have pictured would fit but dont quote me on it lol

Mike


Bob

The "officially licensed" Ford accessories range by Richbrook has the above mentioned gear knobs - they look the dog's in my opinion, but beware fitting issues - the thread in the knob is too long to fit the gear stick properly - if tightened all they way down, you cant get reverse on the lift type sticks - I had to chock mine up to get it to bite earlier. And they seem to scratch easily

Here is the link:

http://www.dcp-shop....oducts_id=19091

Having thought about it though, it looks like they took my review off for this knob - Im considering they have gave me the wrong, non-lift type knob...

I got the handbrake (but not from here) as well and that looks quality


Not what you're looking for?

Register now, we have a huge community of enthusiasts to answer any questions you might have



0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users