Willie3sheds Posted February 23, 2017 Share Posted February 23, 2017 Hi any help greatly appreciated ,2005 Ford Fusion 1.6 petrol running intermittently on 2 cylinders ,not running on 1 and 4 at tickover and below 3k rpm Misfire clears when accelerate over 3k and drives ok all day until rpm drops down to tickover ,misfire reappears after about 1 min and then running on 2 cylinders . I suspect PCM/ECU is seeing some problem at low rpm and switching off 1 and 4 What I can't understand is why when over 3k car will run perfect..if a PCM/ECU fault surely will fail at any rpm. OBD reader shows fault code PO351..have changed coilpack twice used genuine ford pack,new spark plugs ht leads,checked connections to sensors and from coilpack back to pcm,reader does not show any sensor fault Live data check on OBD reader does not show any obvious problem. Would a PCM develop a fault that only shows below 3000 rpm..surely if an electronic component in PCM goes faulty (if spiked from a faulty coilpack) it will fail at any rpm. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.