Jump to content
Do Not Sell My Personal Information


D13HPD ST-2


D13 HPD 95
聽Share

Recommended Posts

Cheers Phil you don't want to know how long it toke me to complete and how many bits ended up in the bin after not going on right 馃槀

My review:聽

Id聽taken her out yesterday for a 30min drive came back and couldn't put my hand on the intake pipe due to it being to hot, and tonight as I'm off work now for a few days I went the same route around the same temperature and made sure she got up to temp both coolant and oil, gave her a blast came back hand on the intake pipe and well I'm actually really impressed, it was cool not cold not ambient temp either but I could happily hold the intake pipe even near the turbo at the back without it feeling hot for 拢20 I call that a success!!聽

Link to comment
Share on other sites


Like the new system youve got there pal. I'm looking at the Graham Goode Carbon Fibre Unit for mine to keep it enclosed and to make the most of the big mouth i have installed.. you get the pipe from ITG ?

Liking it all so far and you've got some bits i want to get done :)

Link to comment
Share on other sites

Yh pipe came with the ITG kit, awesome bit of kit love it so far聽

  • Like 1
Link to comment
Share on other sites

You going to get the map redone to equate for the induction?

Link to comment
Share on other sites

57 minutes ago, Wheels93 said:

You going to get the map redone to equate for the induction?

As the previous owner went for the CP300 package it already had an ECU flash done after it had the induction, intercooler and exhaust fitted, as the ECU is clever enough to know the drop in Intake temps and increase fuel to adapt to the denser air it will be fine, I'm going to get an more efficient intercooler and sports cat fitted in the coming months so will possibly have a tweak of the tune then but as I've technically not changed or added any other components to when it was flashed it should adapt on its own, I'm looking to add other performance parts in the latter of the year and possibly hybrid and bigger injectors next聽year so it will need a custom tune rolling Road tune not just a flash聽

but it went out for a 2 hours drive today a couple of photos taken, again the induction system was cold after a very good blast down the A11 :)聽

IMG_2115.thumb.JPG.73410e92ccd01891f02c9d63230b90dc.JPG

IMG_2116.thumb.JPG.06ae10b58bc77404ffed1b4d6dccf6c6.JPG

IMG_2117.thumb.JPG.47f60d67836ea740bfa472b182afa700.JPG

IMG_2118.thumb.JPG.2f02a335c5e1bc20e30dbe953918e3f8.JPG

Link to comment
Share on other sites


Not a massive update, got a few new parts on there way to me :) and also got the balls to tint some new fog lights, I'll do the indicator lens and also the rear tail light when I can :)聽

IMG_2133.thumb.JPG.465ed98b8af18bbf98f19d7f21649bdd.JPG

Also unsure on what alloys to change to, thinking team dynamic pro 1.2 but what colour either white with yellow Goodyear logo, black and white logo or a Matt/light gold hmm?聽

IMG_2125.thumb.JPG.371054ea9de83ebaae157ea7a2ec4892.JPG

Link to comment
Share on other sites

I'd go all black will look good against your body colour

ImageUploadedByFord OC1493237014.869551.jpg

  • Like 4
Link to comment
Share on other sites

Fitted these today :)聽

nice slim mud flaps all round now

IMG_2154.thumb.JPG.4bf7fea4bf24d143f5b26b284277d249.JPG

IMG_2155.thumb.JPG.2a25579b22bb335a3cd98d7dd394fbe1.JPG

IMG_2156.thumb.JPG.391e3ad3840699de9b0792c5a6767709.JPG

IMG_2157.thumb.JPG.9d5039e5ae3ef9e2da3a13f8d2288c26.JPG

IMG_2158.thumb.JPG.22e5387af491cad57759ea2cdd7f7103.JPG

tinted third brake light and side indicators not sure if they will pass the mot tho 馃槀馃槫

IMG_2160.thumb.JPG.7115d88a56a65e56a1f06d20a56967bb.JPG

IMG_2162.thumb.JPG.76b984b675aa2aece36ac6a1d253d873.JPG

IMG_2163.thumb.JPG.bcc64e0dfc445f9920529f8339634ba8.JPG

IMG_2164.thumb.JPG.13af48679ef64e2235b7808b900026d1.JPG

IMG_2165.thumb.JPG.7a67d69f07ac1d2bbf7a38ca9ceec932.JPG

IMG_2166.thumb.JPG.c7393290101a69b085133218e073979d.JPG

tried fitting the dogs today but will need to take the bumper off -.- fill so that when I get a new intercooler next month!

This also came today :) just waiting for more heat wrap before installing it聽

IMG_2149.thumb.JPG.fd1fb7559bebce0cd6ca5173fce7aa4d.JPG

IMG_2159.JPG

  • Like 2
Link to comment
Share on other sites

looking good and like the tinted lights they look good .does the light still come tough them ok?assume you used tinting spray?

the slim mud flaps look good too.

Link to comment
Share on other sites

2 hours ago, b4zz said:

looking good and like the tinted lights they look good .does the light still come tough them ok?assume you used tinting spray?

the slim mud flaps look good too.

cheers :) the indicators... are not very visible in day light, and i haven't checked the brake light tbh i shall do tomorrow though聽

Link to comment
Share on other sites

  • 2 weeks later...

Not really done a lot atm to the car got a few things planned in, and a lot of bits in the shed but having to wait for a little help to get them fitted -.- but here's some bits I've done this week.聽

IMG_2218.thumb.JPG.ea07b1e20a24be043fde532343ffa001.JPG

IMG_2219.thumb.JPG.d1b766df2b41bfbdef5088b21817ecc0.JPG

wrapped the new new mountune lower charge pipe in heat reflective roll to aid more cooling, if it's as good as the induction hard pipe should help keeping temps down!!聽

Then this happened -.- smashed the splitter leaving a car park today snapped in half and broken 2 bolts holding it on so it's now in the bin and a new one to be ordered, going to go for a more lower profile one so it doesn't bring the front of the car down any lower as it's pretty low already聽

IMG_2222.thumb.JPG.0426ab35ef44283641299ef55a080797.JPG

new DMB number plate came today :) like the clean front end look more just needs the splitter to be back present :/聽

IMG_2223.thumb.JPG.16cb8383a9c4e1fdd65ccaeab1fd5b6b.JPG

IMG_2224.thumb.JPG.e30987b042f2b4823e782b21054fbbcd.JPG

IMG_2226.thumb.JPG.7db0641b3487507594f0362d026e9c24.JPG

FOC support stickers and new ST badge聽

IMG_2228.thumb.JPG.8e95980fce8921a522dd91def5cebd5e.JPG

IMG_2229.thumb.JPG.270ff96e5b33ba5420af24fbc2fc164c.JPG

IMG_2227.thumb.JPG.261bcb7494d52240b073c9f67a0b88fe.JPG

Link to comment
Share on other sites

looking good and did you see how the lights shine from the 3rd brake lights after?

Link to comment
Share on other sites

13 hours ago, b4zz said:

looking good and did you see how the lights shine from the 3rd brake lights after?

I'd like to know this as I'm in two minds weather to tint mine of not

Link to comment
Share on other sites

I'll get a picture of it for you's, but I tested it in a car park and my mate said he could see it clearly indicators ain't to bad during the day outside, the brake light got the same amount of coats so I'd say it's good, I've been followed by numerous police cars and no bother...?聽

Link to comment
Share on other sites

Here's the photos of the brake light for you guys聽

IMG_2248.thumb.JPG.b406e73e20370f8c753f39877ece99af.JPG

IMG_2251.thumb.JPG.494c7d2184dd1b53f34d2ae6ca345f9b.JPG

still very visible I'd say聽

also new washer jets colour coded :) much nicer!!聽

IMG_2244.thumb.JPG.4a36326df1eae4665ff95b80d3fd49e4.JPG

IMG_2245.thumb.JPG.5e81912716cd20c3da83f6b556ef3661.JPG

and im toying with the idea of having the Fifteen52 cup cpoilers fitted instead of a splitter and painting the inserts in the grill like this聽

IMG_2239.thumb.PNG.9126d7838d67aa2c5cdfa68ab4986685.PNG

hmm 馃 What you think?聽

Link to comment
Share on other sites


I like, It stands out from the crowd and not something you see everyday 馃憤馃徏

Link to comment
Share on other sites

cheers for the pic of the brake lights and it looks good. I have just used some stuff like fly eye for mine and it looks ok聽but not got round to putting the spoiler on yet.

the cup spoliers will look good colour coded and like the washer jets.

as they say its the simple things that make the biggest impact

Link to comment
Share on other sites

No worries :) yh I'm still deciding what to do with the front so will leave it stock for now and get other bits I know I want聽

Got a few little touches added this afternoon before work tonight -went for team heko deflectors, and also inlays to match the body colour聽

IMG_2275.thumb.JPG.0d81b17fe6a4d18df23f25615c60ad0a.JPG

IMG_2276.thumb.JPG.08b5cb59f8606ad36ebc133978280ffb.JPG

IMG_2278.thumb.JPG.0f49915a380b253e27d9edc3a804415b.JPG

got some goodies today as well, straight from the US an ecoboost 2.3 mustang 69mm throttle body conversion kit :) and the breedt TB and manifold spacer set - need longer TB bolts as these are to short for the mustang TB and spacer

IMG_2184.thumb.JPG.14e59269baf2966329c7af4ab8f6daea.JPG

IMG_2185.thumb.JPG.1c309b7884250e1d3fd98158602f6604.JPG

IMG_2186.thumb.JPG.d3bb76163dad3d5a8ec33dc2e7643f73.JPG

IMG_2265.thumb.JPG.8f9c36ac490a2c2863e4e892cbdc5cbd.JPG

IMG_2266.thumb.JPG.3afe269882dd738d8d4726c4444bf53d.JPG

IMG_2268.thumb.JPG.d7ceacac35488317414a44097f4b9e64.JPGIMG_2269.thumb.JPG.6c6d25342320735e8a9d48955c13d640.JPG

IMG_2267.JPG

IMG_2277.JPG

  • Like 1
Link to comment
Share on other sites

looking good and like the deflectors and the inlays

Link to comment
Share on other sites

On 29/04/2017 at 5:47 PM, D13 HPD 95 said:

Fitted these today :)聽

nice slim mud flaps all round now

IMG_2154.thumb.JPG.4bf7fea4bf24d143f5b26b284277d249.JPG

IMG_2155.thumb.JPG.2a25579b22bb335a3cd98d7dd394fbe1.JPG

IMG_2156.thumb.JPG.391e3ad3840699de9b0792c5a6767709.JPG

IMG_2157.thumb.JPG.9d5039e5ae3ef9e2da3a13f8d2288c26.JPG

IMG_2158.thumb.JPG.22e5387af491cad57759ea2cdd7f7103.JPG

tinted third brake light and side indicators not sure if they will pass the mot tho 馃槀馃槫

IMG_2160.thumb.JPG.7115d88a56a65e56a1f06d20a56967bb.JPG

IMG_2162.thumb.JPG.76b984b675aa2aece36ac6a1d253d873.JPG

IMG_2163.thumb.JPG.bcc64e0dfc445f9920529f8339634ba8.JPG

IMG_2164.thumb.JPG.13af48679ef64e2235b7808b900026d1.JPG

IMG_2165.thumb.JPG.7a67d69f07ac1d2bbf7a38ca9ceec932.JPG

IMG_2166.thumb.JPG.c7393290101a69b085133218e073979d.JPG

tried fitting the dogs today but will need to take the bumper off -.- fill so that when I get a new intercooler next month!

This also came today :) just waiting for more heat wrap before installing it聽

IMG_2149.thumb.JPG.fd1fb7559bebce0cd6ca5173fce7aa4d.JPG

IMG_2159.JPG

Where did you get those skinny mud flaps from Daniel?

  • Like 1
Link to comment
Share on other sites

They are called Rocco mud flaps on eBay聽

Got these in the post today聽

IMG_2288.thumb.JPG.ffb5008fae5936fab1550a9c4a04c358.JPG

will get them fitted by a mates garage tomorrow as I don't have a long enough socket聽

and some insiration from Panaramics thread sound proofing silent coat聽

before聽IMG_2286.thumb.JPG.bf75793080addc489d859caba9a24fd3.JPG

and after聽

IMG_2287.thumb.JPG.295789a02a37479b23c60ded5be48f36.JPG

probably could have been installed better but if no ones going to see it haha 馃槀 Ready for a sub聽boot build maybe 馃

Link to comment
Share on other sites

Right, I'm just going to say it before anyone else does...

Are they the Australian NGKs?

Sorry, I couldn't help myself I get me coat


Sent from my iPad using Tapatalk

  • Like 2
Link to comment
Share on other sites

18 hours ago, Jonro2009 said:

Right, I'm just going to say it before anyone else does...

Are they the Australian NGKs?

Sorry, I couldn't help myself I get me coat


Sent from my iPad using Tapatalk

Jonro you'll have to fill me in on the joke? I'm not sure I've heard this one haha聽

spent the morning giving the girl a nice clean de-comtanination wash wax and sealed - off out to see my mate about those spark plugs later聽

Also removed the stickers on the rear to give it a more cleaner look - pics don't do the colour and the flake justice knew I loved this colour for a reason!聽

IMG_2295.thumb.JPG.138af855b079e05800cb509283004f01.JPG

IMG_2296.thumb.JPG.cee2f27cafe5a3c66f6665d1388fe885.JPG

IMG_2297.thumb.JPG.4b9b65020b174d689154d74f0f286a04.JPGIMG_2298.thumb.JPG.2d5f6f978850a481ed38551986a59524.JPG

IMG_2299.thumb.JPG.deedba9b7ff86a8d4143773872ffdd2a.JPG

IMG_2300.thumb.JPG.2a5d0b80b40e41a1726478bb1239da65.JPG

  • Like 1
Link to comment
Share on other sites

I think this is one of my favourite cars at the moment, I love the colour and all the mods you are doing. I can live vicariously through this thread lol. Have the pin stripes gone? I was never a fan of that particular mod but that's just my opinion. If they are still there then ignore my last comment, I think they look ace 馃ぅ I do like the wind deflectors, I had them on my Fabia MC and I am just going to order them for my MkV Mondeo. I can't decide if they are going to look good though, the car is white and there is chrome around the windows so I'm not sure. Any thoughts? How do you feel about the shut lines at the front of her bonnet? I've been lead to believe it is something to do with air flow but I keep thinking it isn't shut properly.
As I said, love the car and enjoy following this thread [emoji41] Jon


Sent from my iPad using Tapatalk

Link to comment
Share on other sites

27 minutes ago, Jonro2009 said:

I think this is one of my favourite cars at the moment, I love the colour and all the mods you are doing. I can live vicariously through this thread lol. Have the pin stripes gone? I was never a fan of that particular mod but that's just my opinion. If they are still there then ignore my last comment, I think they look ace 馃ぅ I do like the wind deflectors, I had them on my Fabia MC and I am just going to order them for my MkV Mondeo. I can't decide if they are going to look good though, the car is white and there is chrome around the windows so I'm not sure. Any thoughts? How do you feel about the shut lines at the front of her bonnet? I've been lead to believe it is something to do with air flow but I keep thinking it isn't shut properly.
As I said, love the car and enjoy following this thread emoji41.png Jon


Sent from my iPad using Tapatalk

Yh the pin strips went not going for the look now it's done to much, going for the clean look, I like these team heko ones more than the climair ones, I had those on my golf and they are really broad stick out a lot these are slim are hardly notice they are on tbh, I'd go for then mine were only 拢25 delivered for front and rears!! Well I adjusted the bonnet stoppers, I've spoken to a few people and they've said it was to aim air flow but I can't see what it's going to help tbh, like I have the big mouth Intake which scoops the air up into my CAI, the intercooler and rad are in the bottom and centre grill so there's nothing left to cook down really apart from ambient temps but my engine bay ain't that hot any more tbh, plus I've got a couple of things planned which will only Benicit the temps ;)聽

cheers for the kind comments, I'd adjust the bonnet so it looks closed like it should do.

had te plugs installed the ones that came out had done 35k not really that black but now I'm not sure if it's in my head or not but it seems to pick up revs quicker?? And idles better a lot more crispy sounding probs just me thinking I've spent 拢45 on them so they must have made an Improvment 馃槀

Also forgot to mention painted the door grab plastics gloss black, just got to work out how to get the steering wheel V off to paint 馃

IMG_2301.thumb.JPG.5987b58b7bc953c54bfaa9cc16bf0df6.JPG

IMG_2302.thumb.JPG.ebed737d497f85c6af15dbd0f38e602d.JPG

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

聽 Pasted as rich text. 聽聽Paste as plain text instead

聽 Only 75 emoji are allowed.

聽 Your link has been automatically embedded. 聽聽Display as a link instead

聽 Your previous content has been restored. 聽聽Clear editor

聽 You cannot paste images directly. Upload or insert images from URL.

聽Share





  • Create New...

Forums


News


Membership