Mk 7 fiesta part help

[bigjock]

hello chaps, i have cracked a plastic panel on the fiesta having reversed into my bin. its the plastic panel that sits under the rear windscreen and includes the rear badge. i think it's just clipped on so dont think it will be hard to remove and replace. anyone know where i can get this part/find the part number? the panel is intact only cracked, do you think this is easily/cheaply repairable?

[FMC]

Ford dealer parts counter. I think they come in two versions (possibly 3) - one for titanium with chrome lip, other for rest of range, but will come unpainted, ready primed.

I reckon for the part and to get it painted you could be looking upwards of £70 :(

Might be worth trying a scrapyard/ebay for a second hand one ;)

[bigjock]

Ford dealer parts counter. I think they come in two versions (possibly 3) - one for titanium with chrome lip, other for rest of range, but will come unpainted, ready primed.

I reckon for the part and to get it painted you could be looking upwards of £70 :(

Might be worth trying a scrapyard/ebay for a second hand one ;)

oow that much ouch, have been looking for second hand one but dont know what to call the part, any ideas here? i found a complete front and rear bumper off a mk7 in silver so have asked the seller if he has this bit aswell. cheers

[Mark M.K]

Do you mean the chrome belt between the glass and bootlid? If so, best place would be a ford dealership to get the part numbers. Also FMC, the Zetec and Titanium are the same RE the chrome on the outside. All other cars get a black plastic belt line

[bigjock]

Do you mean the chrome belt between the glass and bootlid? If so, best place would be a ford dealership to get the part numbers. Also FMC, the Zetec and Titanium are the same RE the chrome on the outside. All other cars get a black plastic belt line

its this bit here, this photo is for example only, i shall get a proper pic of damage up when next off. its just a very thin cracked line no dent or missing bits maybe easy to to fill and spray on the cheap? think it may need pulled or pushed out a little then the crack may blend better? do you get a rub in coloured filler or wax for such cracks?

the chrome bit is fine its the upper right bit of the silver plastic that has a 6inch long thin crack running thru it.