Albert27 Posted June 28, 2017 Share Posted June 28, 2017 Hi guys, We are thinking of moving and the house we're looking at has a bock paved sloping drive (highest point at road side, then slopes down to house). It's not a 1 in 4 type hill but enough to make you have the handbrake on a fairly high notch. How practical would it be to work on the car with the usual maintenance jobs using ramps & axle stands? Do any of you work on drives like that? Appreciate your thoughts...... Quote Link to comment Share on other sites More sharing options...
stef123 Posted June 28, 2017 Share Posted June 28, 2017 Most will say no but I quite often do use a sloping driveway for all sorts of work. General servicing, suspension, brakes and even changed a few engines on it. if I'm doing work like brake pipes I will put the car in nose first (drive slopes away from house) and put the back wheels up on a set of ramps which helps level it out a little but also keeps it more stable than 4 axle stands. 2 Quote Link to comment Share on other sites More sharing options...
Roogar Posted June 28, 2017 Share Posted June 28, 2017 My drive is sloping which is handy when changing the oil as the front is up in the air to alloe access to drain plug and oil filter but the car is level so I can do the whole job including toping up oil b4 i drop it down again.Sent from my SM-G930F using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
Tdci-Peter Posted June 29, 2017 Share Posted June 29, 2017 17 hours ago, Albert27 said: How practical would it be to work on the car with the usual maintenance jobs using ramps & axle stands? Do any of you work on drives like that? My drive also slopes. I like it, I just chock the axle I am not lifting, take the brake off to let it firmly down onto the chocks (just bricks usually!), and then the chocks and car are very firmly locked in place by the weight. Just make sure both wheels are well jammed. I prefer to lift the front axle with the handbrake off, then the car can rotate around the rear axle, with the rear wheels staying still on the ground. Then put the handbrake on maybe for extra security when working. I would not want to work on a sideways slope, or try to lift all four wheels. But it works well for one axle at a time. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Ford UK Shop
Sponsored Ad
Name: eBay
Ford Model: FordUK Shop
Ford Year: 2024
Latest Deals
Ford UK Shop for genuine Ford parts & accessoriesDisclaimer: As the club is an eBay Partner, The club may be compensated if you make a purchase via the club
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.