Jump to content
Do Not Sell My Personal Information


PO400 fault code help


fladavid
 Share

Recommended Posts

Hi. 

My engine management light has come on and my fault code reader has given me fault code PO400. I believe that this is something to do with the EGR valve. I have a  Ford Focus 55 plate with a 2.0L petrol Duratec engine but have no idea where the valve is located or what I can do to  possibly clean or replace the valve.

Any help would be very much appreciated. 

David. 

Link to comment
Share on other sites


If it's the same as mk3 Mondeo with that engine, the EGR is located at the top, front, right hand side as you're looking at it.  In front of the coil pack.  

Depends what the actual fault is as to what needs doing to it.  You could try to remove and clean with some sort of degreaser/solvent and a small brush/scraper.  Beware it also houses a heat exchanger so you will lose some coolant when removing it.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share




×
×
  • Create New...

Forums


News


Membership