Jump to content


mattrix

Member Since 27 Feb 2010
Offline Last Active Aug 07 2015 04:34 PM
-----

Posts I've Made

In Topic: Can Anyone Helo With Relay Problem?

07 August 2015 - 04:26 PM

I thought that, but the looms are all encased inside plastic shroud and I have followed it all the way through the engine bay and as far as i can see i can't identify any breaks in the plastic but i'll have another look thanks.


In Topic: Can Anyone Helo With Relay Problem?

07 August 2015 - 09:40 AM

Hi, yes i have checked and changed the fuse, still no working drivers side dipped beam. Are we sure it wouldnt be a relay somehow? There is a reaally loud clicking noise from under the glove box when i turn my headlights on and off. I still need to get the voltage readings as i don't have a multi meter at the moment sorry I will get them as soon as possible, thanks for all your help.


In Topic: Can Anyone Helo With Relay Problem?

05 August 2015 - 08:34 PM

It's my driver's side dipped beam. Passenger side works, and both main beams work. I only tested using a test light, not a multi meter. I will test tomorrow with a multi meter and let you know, the test light was bright on all the other pins in the plug apart from 1 which I guess is the one which goes to the dipped beam on that side

In Topic: Can Anyone Helo With Relay Problem?

05 August 2015 - 06:33 PM

Just checking, the GEM is the block where theloom goes into to connect to the fuseboard? with a black lever to pop it off?


In Topic: Can Anyone Helo With Relay Problem?

05 August 2015 - 05:18 PM

Hi, that's what I meant by "testing voltages etc" in my post. One of the pins on the plug at the back of the cluster has low voltage, if I plug the cluster in on the opposite plug, all lights work.