jordan_macgregor

Apprentice Shipwright at Babcock Marine at Rosyth Dockyard...hopefully about to qualify

Could somebody post a link to the hose they used to connect the non return valves to the jet, i bought 4mm dia stuff off ebay but it seems to loose a connection, so i figured someone on here could give us a nudge in the right direction,

Ta very much,

What about the likes of Tesco performance fuel for example - my trip computer gives me a much better range whenever i fill up with that - which isnt very often, usually just if i'm in Inverness because Shell is ridiculously expensive up there - i usually use Shell Regular....

How does the trip computer calculate the distance to empty just out of curiosity?

Ohhh yeahhh...got a call from the Falkirk Peoples garage, they are HAPPY to carry out the repairs, just need to book it in now! Jakcpot!!

Hi,

i finally got a chance to get at it again, my dad has a Torx tool kit in his car and i kept asking him for a shot but only got it this weekend, i took the bulb out and put it back in - the funny thing is - the clip on the passenger side works the opposite of the drivers side [i think somethings not quite right here] instead of pushing the clip on the holder inwards to secure it, that pops its out.

On the drivers side, and in the Haynes manual, the clip is supposed to be pulled away from the holder to release it....anyway, when i got the bulb back in it looks a wee bit better than the picture i posted, but still projects a slight 'v' on the ground, im beginning to think its the bulb, the only thing is, when i fitted it again yesterday, i didnt do as someone previously said and put the bulb in its slot first, then put the holder on at the back of it...oops...

It is lookking slighlty better so im quite happy, but if i happen to get a shot of the Torx kit again, i'll do as suggested...

Sorry to waffle on...