jellymonster

To be honest i can only remember the one way of doing it and im sure the wiring was a mare i remember adding the extra wire to the stalk have u checked the multi plug connectors there yet

the ones on the indicator stalk? I will have to add a wire, instructions say from a donor block, I get one from the scrappy.

Not bad, I installed a computer into my previous car (as in carputer running windows).

I'll see what I can do

8 wires you dont have the wiring fitted then so no you cant do it the wiring runs via ecu etc etc etc not a job that can be done im afraid thats why we told you to look first mate been down that road myself with my old mk1 the loom basically runs into the dash from the main ecu via fuses and relays branching off into ignition wires cutting into the washer electrics and fueling there is no known retrofit other than to strip the car down and i mean strip then fit the whole loom

this link seems to think you can do it:
http://www.luckyb.pw...ow too comp.pdf

is it legit?

Sorry, don't mean to doubt you.

I bought the computer, indicator stalk and surround for £36, so no big loss.

ok, gave it a bit more force and it came out. Counted the wires.... only 8 =(

Does this mean I can't do it? or I can with a lot of wiring?

If it's possible, had anyone got a guide or something?

Computer came today, at 7:35am (which obviously I missed because I was snoring). I'm going to collect it on Monday.

But in the meantime curiosity got the better of me and I thought I'd look at the indicator stork. But could get it out...

I popped the top cover off the steering wheel, pushed the clip at the top right of the stalk, and from my knowledge it should lift straight up.

Am I missing something?