Jump to content


dm2004

Member Since 19 Sep 2011
Offline Last Active Jun 13 2014 03:16 PM
-----

Posts I've Made

In Topic: Need New Wishbone.

13 April 2014 - 10:41 AM

If you can't get it out, loosen the other bolts that hold the arm in place, 18 mm and two 15mm bolts

Loosen them off and then wack the ball joint out of the hole.

In Topic: Need New Wishbone.

13 April 2014 - 10:38 AM

You need to undo the 21mm bolt on the ball joint and then try and get the ball joint away thread out of the hole, maby a good wack with a hammer if you don't have a ball joint tool, then you need to measure the biggest part of the taper and you need it to measure 18mm or 21mm

In Topic: Need New Wishbone.

12 April 2014 - 08:50 PM

Just I have both sets available so could have tried them both

In Topic: Need New Wishbone.

12 April 2014 - 08:02 PM

Where are you located?

In Topic: Need New Wishbone.

06 April 2014 - 04:44 PM

Just ordered these for mine