Jump to content


Show

simonaldridge82

Member Since 29 Oct 2011
Offline Last Active Jun 18 2014 01:12 PM
-----

Posts I've Made

In Topic: Guide For Focus Mk2/mk2.5 C-Max/kuga ~Elm 327 Cable And Ff2 Program

03 June 2014 - 07:31 PM

yes sorry resistors not capacitors


In Topic: Guide For Focus Mk2/mk2.5 C-Max/kuga ~Elm 327 Cable And Ff2 Program

06 May 2014 - 04:04 PM

hi as I stated before I was sold a focus st steering wheel it was the wrong one although I have modified it to fit not too much bother I still have to replace the capacitors in the switches. knowing what I know now I would just fit switches. I still have to get the cc working


In Topic: Guide For Focus Mk2/mk2.5 C-Max/kuga ~Elm 327 Cable And Ff2 Program

28 April 2014 - 07:29 PM

I TO HAVE BEEN SOLD A "FOCUS STEERING WHEEL" would not fit without modification. I placed my 3 bar wheel on top and drilled the 2 peg holes. I then carefully cut away the bottom unused plug flush to the disc. i then filed the space for the top plug to gain a good fit. fitted wheel fitted horn assembly. I had to change the air bag inflation unit from my 3 spoke wheel to the 4 spoke air bag. I had to make a bracket to secure the inflation unit to seal to 4 spoke air bag and fit earth clip. all gone together ok. altered all settings with elm cruse not working. tested switch with heated window method on and resume have no effect. reading thread I will need to solder new capacitors to the switches. I have seen the diagram in a thread somewhere. if anyone else would need help in converting this type of steering wheel I will have to remove and create a pictured method of installation. please contact pm if you need any assistance.


In Topic: Which Diesel Engine

12 July 2013 - 09:40 PM

runs great bags of power love the car


In Topic: Whoosing Noise From Petrol Tank Focus St

12 July 2013 - 09:38 PM

I am a mechanic of 30 + years. I have city and guilds levels 1 2 3 and specialised in vehicle electronics . I hold other institute certificates, if you want a lesson in fuel systems that is not a problem. a fuel tank is not pressurised you cannot compress liquids and ive never seen a compressor connected to a fuel tank . please don't comment on what you do not understand.