Jump to content


peanut1

Member Since 08 Nov 2011
Offline Last Active Jan 23 2012 05:14 PM
-----

Topics I've Started

Mk2 Mondeo St220 Estate

05 January 2012 - 09:21 AM

hi i have been given a chance to bye a mk2 v reg mondeo st220 estate with 97k on the clock taxed and m.o.t in silver i was just wondering how much i can sale it for to make a profit the car is very clean . i was told that the car is rear as theres not a lot of them around is that because thay are very good cars or you can find one in every scap yard thanks.........luke

Mondao Probs

01 January 2012 - 11:10 AM

hi i have some probs with my car its a 2001 mondeo estate mk3 ...i was stoped bye the old bill to tell me that my rear plate lights are out and to fix them well i have removed the bulbes and thay are both new so i got some new ones and that dont work (FUSE) and when im driveing and stuck in traffic my reves go up and down but wont stall but this only happens when its up to temp in stop start traffic when i put my foot on the brakes (PLUGS)can enyone help ?????????????

Help Needed

15 November 2011 - 09:19 AM

hi im going to change the clutch on my car i was told that you have to change the thrust berring with the clutch because it weres with the clutch is this true as the thrust berring on the car is ok ?

Clutch Probs

09 November 2011 - 06:40 AM

hi all i have a mondeo 2.0 lx and my cluch has started to slip the pedal is right up the top and iv been told that i may need a dule mass flywheel but i have done some homework and all the dmf probs i can fined are making noises were as my car is not it starts/drives/changes gear fine is there a way of telling if i need a dmf before striping the box your help will be most wecome...luke ;)

Dmf Help Needed

08 November 2011 - 09:05 PM

hi all i have a mondeo 2.0 lx and my cluch has started to slip the pedal is right up the top and iv been told that i may need a dule mass flywheel but i have done some homework and all the dmf probs i can fined are making noises were as my car is not it starts/drives/changes gear fine is there a way of telling if i need a dmf before striping the box your help will be most wecome...luke ;)