Jump to content


Member Since 07 Dec 2011
Offline Last Active Yesterday, 06:52 PM

Topics I've Started

Fitting A 2Nd Reverse Light - Help

17 April 2014 - 11:11 AM



finally got my finger outta my bottom (snigger) and decided to do the 2nd reverse light mod after reading Lennys awesome guide. I did do it slightly differently (used a glue gun to bond the second light fitting onto the lense - i hope it will hold!)


I thought I had purchased the right connector off ebay for the additional buulb, wired it all up but it doesnt work.

i'm guessing that its the connector that could be the issue - i tried to see if the plug is getting power and it is so maybe the fitment isnt right and it isnt connecting to the 2 pins?


so, is there a possibility that i can order the correct plug from ford???

If someone can get me the part number than this would be awesome.





Door Cards Removal - 2008

14 April 2014 - 12:58 PM



I'm thinking about upgrading my door speakers so was hoping someone can guide me on how to remove the door cards.


I have use of the wifes car this week so can leave my car in the garage all opened up as i know its not going to be a 5 min job :-(


any tips are appreciated :-)

Focus 2005 Seats Into A 2008?

07 April 2014 - 01:20 PM

hi guys,


any idea if the seats from a 2005 Focus will fit my 2008 model?


won some nice half leather ones on ebay and am not sure if they will fit!


the sellers is in yorkshire, 120 miles away so dont want a wasted trip really.

any info is appreciated


these seats:


Titanium Seats Heated Or Not?

04 April 2014 - 05:48 PM

hi all


can anyone advise if the half leather seats from a Focus Titanium are heated or not?

If they are then what is required for me to get them to work in my Style edition?


Also, how do I go about disabling the airbags?



Been At It With A Hammer And Chisel....again

01 April 2014 - 01:23 PM

some of you may remember that i had bonnet vents that i removed using a hammer and chisel as i wanted to replace the fibreglass vents with carbon fibre looking plastic ones. well...ive only gone and done it again but ths time with the dash pod.

after reading lennys awesome guide i bonded my dash pod/trim thinking it'lll never be removed so bond it down. well, last night i took it off and replaced my current 2 x 52mm gauge set up and replaced it with the dash top pocket/cubby. I have then got a Samsung Media Player 5" screen and placed that into the pocket but mounted it so that it sits upright and can be removed (held by velcro). i can also place my satnav there if required but not both at the same time.


from this:




to this:




video isnt working right now but i'll upload one tonight