Jump to content


1djspikey

Member Since 02 Jan 2012
Offline Last Active Mar 15 2012 08:12 PM
-----

#160359 New Mondeo

Posted by 1djspikey on 09 January 2012 - 06:41 PM

pretty smart but im a bit unsure on the inside the centre console looks a bit poor but the outside look nice :P

spike :)


#160121 Fitting New Boost Gauge Advice

Posted by 1djspikey on 08 January 2012 - 05:02 PM

I see.. so i wonder if you can tap off the actuator feed...

Its proven to work if you take it from the intercooler pipe, without physically seeing the engine i cant tell if that actuator pipe goes to the Intercooler pipes...

You could get another bit of small hose, and a T piece and try it... no harm eh... before you go cutting into anything!


yeah it sound a good there i will give it a go i got an old boost gauge somewere i can probly use that for temp.
i could trace were the pipe goes to from the acumlator if it runs to the intercooler that would be a bonus then :P

cheers

spike :)


#160114 Fitting New Boost Gauge Advice

Posted by 1djspikey on 08 January 2012 - 04:51 PM

whereabouts is your turbo mate?

under the silver plate at the back of the engine i beleive the acumlator is vacume has you can see in picture with the pipe going to it ;)


edited oops sorry lenny you beat me to it :lol:


#159115 Hello New Ford Owner Here !!!

Posted by 1djspikey on 02 January 2012 - 11:53 PM

stef123'

come on then... where did spikey come from :lol:
[/quote]


[]http://i1020.photobu...7_4392371_n.jpg[/]

:lol: me and me mum :lol:

i will take some pictures tomoz and post them ;)

thanks guys for the welcome B)