PantherPL

In my opinnion turbo pressure is from PCM Computer like oil pressure. I don't know why turbo pressure doesn't work 

Maybe we must use ELM Config to turn on something about this sensors or go to Ford Service to use original IDS Computer.

Hi ! I'm from Poland

 

I tried install gauges from ST to TDCI. Unfortunately, gauges doesn't work. Works only oil pressure.

Turbo and oil temperature doesn't work Mayby TDCI doesn't have map sensor and oil pressure sensor.

 

 

Here you have a connection :

 

 

1,2 - battery 12V

3 - ground
4 - ignition 12V
5 - can -   ( pin 17 in main gauges / cable color : blue/red )
6 - can +  ( pin 18 in main gauges / cable color : gray/red )

7 - ilumination - battery 12V

 

Sorry for my english.

Hey,
my name is Arthur. I'm from Poland.

I found your description of the installation of dashpod of the Focus ST. I wanted to ask you - is it possible to install the original ST dashpod to Focus 1.8 TDCI with original electrical harness? I found the wiring diagrams in which it is written that the oil temp, turbo work by installing the HS-CAN.

Sorry for my English.

Greetings from Poland