Jump to content


GJC

Member Since 08 Mar 2012
Offline Last Active Oct 22 2014 08:36 AM
-----

Posts I've Made

In Topic: New Fiesta Esp

22 October 2014 - 08:33 AM

Thats not really how it works, the button you have isn't a discreet switch behind the button is a small PCB that has all three on it, and they do or don't have the various bits  

 

See http://www.fordowner...my Mk 7 switch.

 

You can't easily mix and match them positionwise unless you want to start hacking apart the PCB..

 

I went and looked at the ford brocure, and If the start stop button is on the left, then the ESC is central andp parking sensors on/off on the right.  Depending on what switxches are in FINIS you may have to take one apart as I did to frankinstein one together


In Topic: New Fiesta Esp

22 October 2014 - 06:51 AM

What position is the Start Stop switch.    The Mk7 had   (from left to right)

 

ESP

Passenger Airbag off Warning

Parking Sensors

 

If its in the middle it may because if memory serves right the airbag warning light has moved up to the middle of the console.  The Engine On Off is an option on the Zetec S so you should be able to do a straight swap if you can get the right FINIS code for the switch. (iNath I guess)


In Topic: Changing Footwell Lights On Mk7.5

22 October 2014 - 06:34 AM

The foot well ones  are a simple friction fit, you just push them in.  You can remove and fit them when they are on (and as LED's only work one way it helps to do so) but the "old" filament bulbs can be hot so you may need gloves or at least pull them out when off.    Sit in the seat and reach forward when the door closed and you should find them easy enough to pull out, then open the door, and use a torch to put the replacements in.

 

 

 

I bought some flashing 5 colour "Disco" ones for a student at work as a leaving present, and he was quite taken with them, I only meant it as an annoying joke present..


In Topic: Front Parking Sensor Switch - To Work With Aftermarket Sensors

08 October 2014 - 07:39 PM

See http://www.fordowner...16-tdci/page-12

 

I took the ESP switch apart and traced the pin outs as I wanted to have a ESP disable and parking sensors on one switch and ford don't do that switch combo..


In Topic: Help Please. Drivers Wing Mirror

12 May 2014 - 06:59 AM

Best guess is the electrical connection is not working, or has come loose. Its all connected by one block. You'll need to fish it out and check its OK, as I m sure you would have connected it when replacing the mirror it may be the locking clips have broken so its worked loose in the door.