Psyence

Hi,

Thanks for the bug report, i'll check it out and see whats wrong.

Psyence

Hi, Psyence.
I used your software, but I found it seems a bug.
When I tick the DDS box and intent to write to HEC.
It shows "Download data from HEC first".
But I done it before I tick the DDS box.
Is anything I miss or wrong operation?
Thank you.

psyence.

Is your software going to be ready for general release soon. would like to try some of its features.
or are you still looking for more Beta testers. Please let me know I would still be interested.

You can download the software from http://www.psyence.co.uk/FDS.zip
Please be aware that this is still an early release, and it may not be 100% bug free. Please post suggestions, problems etc

Thnx

hi Psyence

Do you by any chance have any programs that will allow me to change settings like we can on our focus's mk2's that will work with the current fiesta model.

I want to fiddle around with my g/f's 2009 fiesta style lol

Jamie

Hi James,

Sorry but the current version of the software only supports the Focus Mk 2 & its variants (C-max etc). Once the software matures i may try to add more functionality. I believe that the configuration parameters for the Fiesta are stored differently from the Focus, so it is not a small undertaking to understand where in memory the different settings are stored.

The DTC (fault code) side of my software may work, but i haven't tested it on any other car yet.

Anyone (civil-zz, Psyence, ...) willing to share required knowledge, algorithms etc. so we could create Android application capable of re-configuring AS-BUILT data just like Windows applications do? It's pretty inconvenient to carry laptop to my car while I could just do everything via ELM327 bluetooth dongle and my Android phone? Personally I am capable of Android programming should special timings. etc not be needed for serial communications.

Hi Jarp,

To get started the first thing i recommend is reading up on the ELM327 device spec and the OBD / CAN communication specs.
Once you understand how to get the basic communication functioning, i'll be able to answer more questions.

I'm still hoping to get the first version out today, but my daughter has been ill all day so my coding / testing time has been very limited.

As this is the first verion, i only want to release the software to a few people, no more than 5 or 6.
If you are interested in Beta testing and understand that the software is likely to contain bugs and if your interested in helping to make the software better please send me a PM with your email address.