Jump to content


Show

LilLew

Member Since 15 Oct 2012
Offline Last Active Nov 05 2012 08:39 AM
-----

Posts I've Made

In Topic: Possible Head Gasket Gone

31 October 2012 - 08:55 PM

nah my mrs has not stopped swearing at me yet lmao and yes the head is cooked i have started the clean up the under side before i get it skimmed cylinder four seems to be where the head gasket had failed there is alot of carbon left and it is very wet

In Topic: Possible Head Gasket Gone

31 October 2012 - 07:31 PM

here is another update i think there has been some over heating issues in the past
cylinder 4
http://i656.photobuc...0121031_010.jpg
cylinder 3
http://i656.photobuc...0121031_009.jpg
cylinder 2
http://i656.photobuc...0121031_008.jpg
cylinder 1
http://i656.photobuc...0121031_007.jpg
All cylinders
http://i656.photobuc...0121031_006.jpg
Before
http://i656.photobuc...0121031_003.jpg
Close up
http://i656.photobuc...0121031_004.jpg
After
http://i656.photobuc...0121031_005.jpg

In Topic: Possible Head Gasket Gone

31 October 2012 - 03:38 PM

head is now off and sat in the house ready for cleaning and skiming

In Topic: Possible Head Gasket Gone

30 October 2012 - 06:04 PM

failed emission tests by miles produces more gases then a chevvy v8 according to the mot guy WOOPS

i have just started to strip it down and i have found something disturbing

Posted Image
im glad i am doing cambelt kit as well Ignore the shouting the mrs was calling me

In Topic: Brake Problems? Or Clutch?

18 October 2012 - 09:10 AM

personally i would check the brake pads see what condition they are in and change them if needed i would also bleed the brake fluid