Jump to content


Show

Big_dom91

Member Since 18 Oct 2012
Offline Last Active Today, 10:42 AM
*****

Topics I've Started

Air Con Problem

24 July 2014 - 12:40 PM

Been a while since my last post but help is needed once more.

Went to get my air con regassed as its rather warm to find it was empty and then as the fella was doing all his stuff something went pop, anyway got this printout and dont know whether the part number is
**19N651A** so could anyone confirm this so i can try and find the part online as ford want £90 for it cheers people :)

Sent from my GT-I9300 using Ford OC mobile app

Build Thread Take 2 Haha

05 April 2014 - 11:37 PM

So since the first post didnt add a few pics hopefully theyll all be in this one :unsure:

So july 2012 i purchased my first ford and baught a 2009 59 plate 1.6L petrol Zetec with only 11,000 on the clock and a full ford service history

Attached File  1396739610666.jpg   106.34KB   75 downloads

First mod after winning an ebay bidding war was these 18" Zetec S alloys

Attached File  1396739667411.jpg   13.92KB   74 downloads
Attached File  1396739691053.jpg   135.77KB   73 downloads

Next was to spruce up the front calipers with some red caliper paint

Attached File  1396739771101.jpg   45.05KB   71 downloads
Attached File  1396739801097.jpg   41.12KB   70 downloads

After this came some DMB gel overlays for the front, rear and steering wheel

Attached File  1396739877350.jpg   53.95KB   73 downloads
Attached File  1396739895641.jpg   81.69KB   73 downloads
Attached File  1396739918397.jpg   76.48KB   70 downloads

I then tried me hand at some carbon wrapping but after having little sleep and being up since 4am i could only manage to get the garage door looking ok

Attached File  1396740027087.jpg   68.05KB   73 downloads

Added the Zetec S lower grille

Attached File  1396740072679.jpg   96.27KB   71 downloads

Eventually the alloys needed refurbishing so off the bodyshop they go decided on gloss black as i think they suit the car very well

Attached File  1396740198398.jpg   104.08KB   73 downloads
Attached File  1396740228648.jpg   70.52KB   72 downloads

Whilst it was in there the chrome bonnet trim was colour coded

Attached File  1396740286142.jpg   78.15KB   74 downloads

Enough was enough with the blue wheel centres so another order for DMB :D

Attached File  1396740349726.jpg   63.2KB   71 downloads

Finally got round to ridding the rear rust buckets sorry drum brakes of missing out so few coats of black paint and they look alot better

Attached File  1396740455100.jpg   78.1KB   72 downloads
Attached File  1396740472937.jpg   79.33KB   75 downloads
Attached File  1396740491606.jpg   68.75KB   72 downloads

Next on my list will be to fit the rest of the Zetec S kit so happy viewing :P
Sent from my GT-I9300 using Ford OC mobile app

Big_Dom91's Build Thread So Far.......

05 April 2014 - 10:52 PM

July 2012 part ex'ed me fiat punto and baught me first ford 59 plate 1.6 zetec only had 11,000 on the clock with a full service history
[attachment=14141:1396735803372.jpg]

November 2012 after a little bidding war on ebay ended up buying a set of four 18" Sport pack alloys for only £360 :D
[attachment=14142:1396736131299.jpg]
On the car
[attachment=14143:1396736208951.jpg]

Also decided to smarten up the rusty front callipers:o

After a good scrub with a wire brush
[attachment=14144:1396736308535.jpg]

First coat on better already :P
[attachment=14145:1396736379160.jpg]

3 coats later and they're done
[attachment=14146:1396736433744.jpg]

Next it was time for some DMB's
Front
[attachment=14147:1396736569815.jpg]

Rear
[attachment=14148:1396736630085.jpg]

Steering wheel
[attachment=14149:1396736672603.jpg]

Only other interior mod that i tried was carbon wrapping:(

Got as far as the garage door:lol:
[attachment=14150:1396736761287.jpg]

Ended up leaving it after i couldnt get the bubbles out in my defence tho i had been up since 4am for work haha

Decided to fit the zetec s lower grille
Attached File  1396737325832.jpg   96.27KB   22 downloads

Next thing was to get alloys refurbed and resprayed from silver to gloss black

Think they suit the car better than the silver wheels
[attachment=14151:1396736952960.jpg]
[attachment=14152:1396737001026.jpg]

Also had the chrome bonnet trim sprayed panther black whilst it was in the paintshop
[attachment=14153:1396737068617.jpg]

Once the car was back some more DMB's were added black with red writing
Attached File  1396737462406.jpg   63.2KB   22 downloads

Another asthetic mod long long overdue
Painting the rusty rear drums black to blend in better
Attached File  1396737580040.jpg   78.1KB   22 downloads
Attached File  1396737596410.jpg   79.33KB   22 downloads

Finished and looking alot better
Attached File  1396737639734.jpg   58.37KB   22 downloads

Next on the list is to fit rear LED's from an ST when a friend from work gets them ready :angry: and then probally get the rear bumper skirt, side skirts and the ST Spoiler anyway enjoy :D


Sent from my GT-I9300 using Ford OC mobile app

St Rear Lights On A Zetec

24 March 2014 - 05:04 PM

Buying a set of basiclly new ST rear led set of light clusters from a mate in work on friday and just wondering before i purchase them are they straight plug and play or would i have to dice and splice wires :wacko:



Sent from my GT-I9300 using Ford OC mobile app

Nice New Refurbed Alloys :d

11 March 2014 - 01:36 PM

So just got me car back after having me alloys refurbed and resprayed black and also my bonnet trim sprayed black aswell

Attached File  1394544195363.jpg   65.39KB   46 downloads
Attached File  1394544224246.jpg   70.52KB   46 downloads
Attached File  1394544240777.jpg   104.08KB   47 downloads
Attached File  1394544259253.jpg   78.15KB   45 downloads

Use will have to excuse the dust on the car havent had time to give it a clean yet but overall very happy now with how it looks only thing that did tick me off was the fact i measured up the centre caps and measured 50mm ordered my new gmb centre caps went to fit them and there to small :angry: so think il just take the centre caps off spray em black and fit the smaller ones hopefully wont be as noticeable then also need to get some black wheel nuts to really finish it off :)
Sent from my GT-I9300 using Ford OC mobile app