Jump to content



Member Since 03 Nov 2012
Offline Last Active Jun 06 2015 11:44 PM

Posts I've Made

In Topic: Unable To Start Focus After Removal Of Egr Valve(2005 1.6Tdci Mk2)

06 June 2015 - 11:35 PM

Im guessing you had to remove the fuel pump to get the EGR off as I did when I blanked mine, are you sure you plugged it back in when you re fitted it?

In Topic: 2005 1.6TDCI injector removal/re-sealing

06 June 2015 - 11:29 PM

Any news on how to remove this injector? I cannot get the plastic bit off that the electronic plug goes in! I have a snapped glowplug tip in the engine and am hoping to fish it out by removing the injector

In Topic: Changing 12V Input From Constant Live Feed To, Ignition Feed.

27 May 2015 - 11:54 PM

I'm also attempting to try this! I have been reading also and have read that the 12v socket switches off after 10mins to half an hour after the car has been locked and then becomes active again once the doors are unlocked, it could be worth checking this as this could be useful for the dashcam if this is the case, for example when you park up at tescos and go shopping it will still record for 10 mins (in case someone reverses into your car)

In Topic: Ford Focus (2006) 1.8 Tdci - Limp Mode

27 May 2015 - 11:48 PM

Be careful removing them I attempted to do my glowplugs today and the first one snapped its half threaded and the top has snapped off, by the looks of things I have myself a nightmare!

In Topic: 12V Ignition Cable?

27 May 2015 - 09:14 PM

Soooo I put this job off until the piggy back fuse arrives and I decided to get the other jobs done today, I blanked off the egr will little to no problems.... Then decided to change the glow plugs 😭 long story short the first one snapped off, it's half threaded half not and the top has broke off :( any tips for removing this? From searching YouTube ect it looks like you need some specialist tools, should I make a new thread?