Jump to content


peteandem

Member Since 04 Nov 2012
Offline Last Active Nov 04 2012 08:25 PM
-----

Posts I've Made

In Topic: New Fusion Owner ....a Few Questions!

04 November 2012 - 05:00 PM

This was posted a long time ago so i am guessing that you got this sorted. However just in case i had the same problem with my reversing sensors when they were plugged in. Turned out that the guy who fitted them had fitted one of them upside down so it was pointing towards the floor at all times. That way it always thought that something was close to the car.

In Topic: Fusion Dog Guard

04 November 2012 - 04:43 PM

I had one of these fitted to mine. It took a bit of playying to get it in right but it bit the job. Never tried it with the parcel shelf so do not know about that

In Topic: Fuse Box

04 November 2012 - 04:41 PM

I have just been into my fusebox through the glove box and it is very easy

When you open the glovebox, look to both sides and you will notice that there is 2 tabs stopping it from openning further. Pull in the glovebox by these points so that the tabs can pass the solid plastic of the dash and the glove box will open completely and flop down, you can then get to the fuse box. If like me you have lots in the glovebox, when you open it fully, if you pull it gently towards you, it is only clipped in and will unclip and the whole glove box can be moved out of the way