Jump to content


Show

mini-st170

Member Since 01 Feb 2009
Offline Last Active Apr 16 2009 10:44 PM
-----

Topics I've Started

focus st170 in a mini. (rwd)

16 April 2009 - 10:34 PM

hi all i am doing a project which consists of a 1990 mini, st170 engine, sierra gearbox, diff etc. i have got engine all in place with original inlet etc. now i need to get it running. i am going for the aftermarket ecu for tunability. i basically need to know how i get the variable valve timing to work. been looking at the megajolt system which runs with edis 4. anyone done this before or any ideas welcome. many thanks luke

Focus ST170 in a mini

01 February 2009 - 03:43 PM

hi all. i have recently took on the task of doing a rwd mini st170 with sierra gearbox, diff etc. i have since got the engine in the car and mounted. i am changing the throttle bodies for suzuki gsx-r 750's as they fit straight on. now the problem i have is the wiring. i do have the loom but have a feeling someone has chopped the ecu plug off. i am missing the ecu anyway but have the clocks and would like to use them if possible. where can i find a diagram showing what plug goes where etc. i can source an ecu or buy an aftermarket ecu but still either need a new loom or find an ecu with ready made loom. i am in desperate need of what to do next and what path to follow. any help is greatly appreciated. cheers luke