Jump to content


Rampage646

Member Since 04 Jan 2013
Offline Last Active Jan 24 2014 07:55 PM
-----

Topics I've Started

Engine Swap?

14 January 2014 - 03:01 PM

Hi all,

 

I'm looking at swapping the engine in my 2010 Fiesta 1.25, to a MR155 (Mountune tuned 1.6). The engine comes with the gearbox, air box and ECU. Would this be possible, i.e would the new ecu just plug and play or would it be an extremely complicated pain in the !Removed!? If anyone has anything to share then it would be a massive help, thanks!!!


Fiesta Mk7 1.25 Lowering Springs

31 May 2013 - 03:15 PM

Hey guys, a friend has offered me some 30mm lowering springs that are made by Lo. The thing is, they are advertised as being for the 1.6 Fiesta rather than my 1.25. Lo also do specific springs for the1.25. Now I know that the engine in the 1.6 will be slightly heavier, but my question is, will these springs from the 1.6 fit my 1.25 fiesta, and if so, will they still lower it by the same amount?

Fiesta Mk7 3Dr Rear Interior Plastics Removal

16 May 2013 - 02:55 PM

Hey guys, I was just wondering if there is any specific way of removing the interior plastics in the rear of my Fiesta mk7 or any specific tools that I will need. When I say the interior plastics, I mean where the rear door cards would be (if it had rear doors that is ;) ). My reason for this is I have a large "ish" dent which I would like to try and push out a little bit or fix completely. Any help would be appreciated :)


Will My Fiesta Pass It's Mot?

17 March 2013 - 10:22 PM

Hi all,

 

My fiesta has it's MOT due soon and there are some points which are causing me worry. These things are:

 

Broken Door Mirror (Near Side)

- It's still attached to the car, wobbles around a little and the glass is smashed. You can't tilt the mirror because the motor is damaged, and this makes the mirror pretty much un-usable...

(No picture)

 

Damaged Bumper

- It's very small damage... There is a crack in the bumper, but it leaves part of a metal bar slightly exposed (not sure if it's the chassis). See picture below...

BD1_zps05d151de.jpg

 

Broken Headlight Connectors

- The headlights function perfectly, but the brackets or screws near the front bumper are snapped. See pictures

HL1_zps513f2acd.jpg

 

 

So... does it have much chance of passing the MOT?

Hopefully someone here will know the answer ;)