Jump to content



Member Since 29 Jan 2013
Offline Last Active Nov 08 2013 06:58 PM

Posts I've Made

In Topic: Replacing Rear Wiper Motor

08 November 2013 - 06:59 PM

Fairly straight forward open remove the wiper arm 10 mm or 13mm nut then open the boot and theres 2 t25 torq screws in the pull down handles remove them then pull the panel off its clipped on youll see the motor now and theres the connector to the right of it unplug it undo the 3 10mm bolts that hold it in now gently remove it from the windscreen rubber refittings just the reverse to make sure you dont damage the rubber or catch it a little smear of washing up on the stalk helps bolt in place n test before refitting everything


Great! Thanks pal, will give this a go tomorrow

In Topic: New Ford Owner And Have A Few Questions

30 January 2013 - 07:51 PM

There is only one screen wash tank. Obviously make sure thats full of water/screenwash, erm it could be a faulty pump, a break in the hose maybe? Does the rear screen washer work ok?

Yeah, the screen wash comes out if I put the arm towards me, its just when the button is pressed, no water comes out and only wipers work.

In Topic: New Ford Owner And Have A Few Questions

30 January 2013 - 07:25 PM

Yes screen wash should come out to clear the screen hence the 3 wipes and then the addition wipe to catch the last run of water

What do you think could be the cause of this not working? Is there a seperate screen wash tank for this button?

In Topic: New Ford Owner And Have A Few Questions

30 January 2013 - 12:28 PM

Thanks for the replies, I'll take a look at the fuses tonight. If the rear window wiper ends up being a wire issue, does it cost a lot to get fixed? Is it something that a complete novice could do?

I also forgot to mention another issue, but not sure if its an issue. There's a button on the windscreen wiper arm(if that's what its called) that when I press it, the wipers go off for 3 wipes, wait a few seconds, then a final one. Is the screen wash supposed to come out when this is pressed as when I pressed the button, it sounds like it should.