Jump to content


Show

RonaldFord

Member Since 31 Jan 2013
Offline Last Active Feb 13 2013 06:27 PM
-----

Topics I've Started

No Ecu Communication

10 February 2013 - 05:01 PM

Hi. I bought a 1999 Mondeo MK2. 2.0L Zetech engine. Unbeknown to me, this vehicle could not be repaired by the Ford Dealers. Dash lights up when you turn the key, but the engine does not crank. Starter is ok. The Dealers replaced the ECU and interior fuse box. They swopped these items from an identical vehicle without any luck. The "faulty" ECU and fusebox worked fine in the other vehicle. The only items they did not swop was the engine compartment fuse box and the wiring looms. They checked the engine and dash wiring looms and found no problems there. They could not communicate with the ECU. Please advise what could be the problem. I checked the connectors and engine fuse box. They all seem ok. Thanks.

Mondeo Mk3 Problems

31 January 2013 - 01:47 PM

Hi All. Please help! I recently reconditioned my Duratec 2.0L Mondeo engine. The engine idles fine, revs fine, starts fine and even accelerates fine. However, whenever I depress the clutch at an intersection, the revs fall right down and the engine dies. It starts at the first swing again. Someone told me that the timing was out. I rechecked and reset it. Still the same problem. What else can I try? Thanks.