Jump to content


Member Since 20 Feb 2013
Offline Last Active Today, 11:22 AM

Posts I've Made

In Topic: Kpgs Mk3 Focus Titanium

Today, 08:10 AM

If you're aiming for the white-ish look on the fogs too, I would recommend getting something like this:
...which also have DRLs in it and a white LED fog light. Looks pretty nice and also the light output is very good from the fog light. Plus the combination of black and clear glass/white LED... :wub:  ...only thing missing would be the chrome surrounding :D lol

I do like those a lot, the second set especially but they're a bit expensive for me at the minute. I'm all about the cheap and cheerful lol maybe for Christmas !

Sent from my iPhone 5s.

In Topic: Kpgs Mk3 Focus Titanium

Yesterday, 11:02 AM

Looks great ;) ... way past my wrapping skills :D ... I tried to wrap my stereo trim once, because I ordered the wrong colour, but the wrap wouldn't fit there for the world, lol :D ... ended up spraying it with plastidip :D
Btw, I think you would get it done easily with HIDs and reprogramming, it's not that different from Mk2 - if you did something with ELMconfig, you can do this also ;) ...and there's a guide for ELMconfig here on forums :)
Btw, did you eventually put HIDs into foglights too? Or it just looks a bit purple-ish on the picture?

Lol aye wrap vinyl can be difficult to work with depending on the application but then again, it's my job to know how lol !

I've read through that whole elmConfig thread and I'm just not up to it to be honest.

The fog light bulbs are actually Cree ones. No one believed me about the purple tint but yea I notice it a lot. I'm actually thinking of putting the yellow fogs I had on my fiesta in there instead. But will probably leave that until the car is lowered and has the windows tinted as it'll match the look better I think.

Sent from my iPhone 5s.

In Topic: Kpgs Mk3 Focus Titanium

Yesterday, 10:05 AM

Sooo, wrapped one of my foglight surrounds:

Attached File  ImageUploadedByFord OC1438681998.324986.jpg   63.08KB   10 downloads

Attached File  ImageUploadedByFord OC1438682052.296839.jpg   67.74KB   10 downloads

Attached File  ImageUploadedByFord OC1438682064.166357.jpg   64.59KB   10 downloads

Attached File  ImageUploadedByFord OC1438682105.453278.jpg   47.59KB   10 downloads

Attached File  ImageUploadedByFord OC1438682124.848474.jpg   56.42KB   10 downloads

Looks good, if I do say so. Will tackle the other side tonight.

Sent from my iPhone 5s.

In Topic: Kpgs Mk3 Focus Titanium

Yesterday, 09:52 AM

Take a look at Wilco's thread here:
He has dealt with HIDs on his Mk3, I think I saw there a solution to get rid of the notification error ;)

Yea I had a read through his thread before. He mentions getting passed it by reprogramming the PCd or something. Way passed my skill level lol

Sent from my iPhone 5s.

In Topic: Kpgs Mk3 Focus Titanium

02 August 2015 - 02:11 PM

No tints but have another update:

Attached File  ImageUploadedByFord OC1438523852.355176.jpg   74.22KB   16 downloads

Attached File  ImageUploadedByFord OC1438523861.489335.jpg   72.63KB   16 downloads

H7R 6000k HID kit. What a hassle this was to fit. Had to fit a relay harness and all that crap but got it done and happy with the results despite the warning message still showing when turning the headlights on. But if I press 'OK' it goes away.

Some pics of where the relay was tucked:

Attached File  ImageUploadedByFord OC1438523980.765317.jpg   77.98KB   16 downloads

Attached File  ImageUploadedByFord OC1438523990.448979.jpg   62.14KB   16 downloads

Great light output over stock, very pleased.

PS. I don't want to hear/see any comments about HIDs in reflectors. It's my decision, it's done. I know all the points for and against. Don't need them repeated. Thanks.

Sent from my iPhone 5s.